# Unattended Execution Timing

Between-event time is observed time with no active command; it may include model, service, transport or client waiting. Between-cycle gaps include backoff, preparation, pipeline work and restarts; do not add them again to the phase totals. Historical backoff was not instrumented.

Cycles: 50; aggregate measured time: 3841.051 s.

| Phase | Total (s) | Share | Count | Average (s) | Maximum (s) |
|---|---:|---:|---:|---:|---:|
| agent/post-read | 908.931 | 23.66% | 194 | 4.685 | 24.270 |
| agent/editing | 733.969 | 19.11% | 32 | 22.937 | 69.947 |
| pre-agent-pipeline/business-acceptance | 541.965 | 14.11% | 32 | 16.936 | 57.768 |
| pre-agent-pipeline/build | 508.192 | 13.23% | 27 | 18.822 | 49.624 |
| agent/post-edit | 232.622 | 6.06% | 17 | 13.684 | 49.249 |
| agent/initial-decision | 193.487 | 5.04% | 18 | 10.749 | 13.462 |
| agent/decision | 177.232 | 4.61% | 45 | 3.938 | 16.610 |
| agent/synthesis | 96.873 | 2.52% | 22 | 4.403 | 15.357 |
| pre-agent-pipeline/artifact-sync | 59.892 | 1.56% | 23 | 2.604 | 9.046 |
| agent/failure-recovery | 58.735 | 1.53% | 6 | 9.789 | 15.930 |
| preparation/continue | 58.667 | 1.53% | 48 | 1.222 | 6.746 |
| post-pipeline/business-acceptance | 55.990 | 1.46% | 1 | 55.990 | 55.990 |
| post-pipeline/capability-registry | 41.248 | 1.07% | 10 | 4.125 | 4.289 |
| post-pipeline/build | 37.256 | 0.97% | 1 | 37.256 | 37.256 |
| pre-agent-pipeline/business-audit | 31.882 | 0.83% | 32 | 0.996 | 1.050 |
| preparation/implementationPacket | 31.778 | 0.83% | 48 | 0.662 | 0.922 |
| post-pipeline/cmake-regenerate | 26.140 | 0.68% | 1 | 26.140 | 26.140 |
| agent/finalization | 18.262 | 0.48% | 18 | 1.015 | 1.477 |
| pre-agent-pipeline/cmake-regenerate | 10.600 | 0.28% | 1 | 10.600 | 10.600 |
| other | 7.677 | 0.20% | 28 | 0.274 | 4.356 |
| scheduler/process-start | 2.747 | 0.07% | 19 | 0.145 | 0.247 |
| preparation/batchPreflight | 2.247 | 0.06% | 48 | 0.047 | 0.050 |
| post-pipeline/artifact-sync | 1.359 | 0.04% | 1 | 1.359 | 1.359 |
| pre-agent-pipeline/preflight | 1.202 | 0.03% | 23 | 0.052 | 0.079 |
| post-pipeline/business-audit | 0.963 | 0.03% | 1 | 0.963 | 0.963 |
| post-pipeline/module-registry | 0.953 | 0.02% | 10 | 0.095 | 0.098 |
| source/read | 0.114 | 0.00% | 206 | 0.001 | 0.004 |
| post-pipeline/preflight | 0.067 | 0.00% | 1 | 0.067 | 0.067 |
| post-pipeline/acceptance-contract-preflight | 0.001 | 0.00% | 5 | 0.000 | 0.001 |

## Wall-Clock Coverage

First cycle start to last observed event: 3665.535 s.
Inside observed cycles: 2434.167 s; between cycles: 1231.368 s.

| Previous Cycle | Next Cycle | Gap (s) |
|---:|---:|---:|
| 7725 | 7729 | 92.371 |
| 7729 | 7731 | 74.958 |
| 7731 | 7734 | 107.505 |
| 7734 | 7735 | 8.668 |
| 7735 | 7741 | 241.715 |
| 7741 | 7745 | 86.923 |
| 7745 | 7749 | 118.139 |
| 7749 | 7750 | 8.142 |
| 7750 | 7751 | 1.642 |
| 7751 | 7753 | 41.049 |
| 7753 | 7757 | 280.252 |
| 7757 | 7758 | 8.394 |
| 7758 | 7759 | 7.844 |
| 7759 | 7760 | 2.514 |
| 7760 | 7762 | 47.730 |
| 7762 | 7765 | 94.790 |
| 7765 | 7766 | 8.733 |

## Cycle 7717

Task: FW-P6-FPA-Y; batch: {'id': '7d5dafdea47cf14d21832e6e', 'module': 'Mesh', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 11}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.001 |
| batchPreflight | 0.049 |
| implementationPacket | 0.573 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7718

Task: FW-P6-FPA-Y; batch: {'id': '0efc8421455302f00fb66ce0', 'module': 'Assembly', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.006 |
| batchPreflight | 0.048 |
| implementationPacket | 0.625 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7719

Task: FW-P6-FPA-Y; batch: {'id': '39acfe35d7ac28cb0c2561cb', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 16}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.014 |
| batchPreflight | 0.048 |
| implementationPacket | 0.814 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7720

Task: FW-P6-FPA-Y; batch: {'id': 'b692d9adf3bf308d9e7006a3', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 6}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.029 |
| batchPreflight | 0.048 |
| implementationPacket | 0.684 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7721

Task: FW-P6-FPA-Y; batch: {'id': '235b8608095d21baa8dab65a', 'module': 'Fem', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.038 |
| batchPreflight | 0.050 |
| implementationPacket | 0.600 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7722

Task: FW-P6-FPA-Y; batch: {'id': '298f7a203cafccff0ee2c368', 'module': 'CAM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 5}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.053 |
| batchPreflight | 0.049 |
| implementationPacket | 0.620 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7723

Task: FW-P6-FPA-Y; batch: {'id': 'be665a4d230e2e9082ecdb51', 'module': 'Cloud', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.976 |
| batchPreflight | 0.048 |
| implementationPacket | 0.647 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7724

Task: FW-P6-FPA-Y; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 6.746 |
| batchPreflight | 0.049 |
| implementationPacket | 0.922 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7725

Task: UNATTENDED-OPTIMIZATION; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}.
Observed command time (union): 5.272 s; between-event time: 169.607 s; file changes: 2.

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 2.171 | 0.001 | 0 | /bin/bash -lc "sed -n '1,220p' docs/UNATTENDED_WORKFLOW.md;" |
| 2 | source/read | 0.216 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/periodic-optimization/optimization-000174-context.json" |
| 3 | source/read | 0.215 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' docs/current/provided-source-index.md" |
| 4 | source/read | 11.406 | 0.001 | 0 | /bin/bash -lc 'python3 tools/fast_source_search.py --help' |
| 5 | source/read | 0.216 | 0.000 | 0 | /bin/bash -lc "sed -n '1,150p' web/src/part-desktop-adapter.ts" |
| 6 | source/read | 12.673 | 0.001 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py --pattern 'BoxSelection\|boxSelection\|box-selection' --paths freecad-source/src/Mod/Part/Gui/Command.cpp freecad-source/src/Mod/Part/Gui/BoxSelection.cpp freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp web/src/workbench-shell.tsx web/src/part-desktop-adapter.ts tools/part-fixed-box-business-cases.mjs --context 12 --max-count 65" |
| 7 | source/read | 0.217 | 0.000 | 0 | /bin/bash -lc "sed -n '1,110p' tools/part-business-cases.mjs" |
| 8 | source/read | 0.216 | 0.000 | 0 | /bin/bash -lc "sed -n '1,90p' docs/business-acceptance/Part.json" |
| 9 | source/read | 4.788 | 0.001 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py --pattern '.*' --paths docs/WEB_BUSINESS_MIGRATION_RULES.md freecad-source/src/Mod/Part/Gui/BoxSelection.cpp tools/run_business_acceptance.py tools/wasm-probe-runtime.mjs --max-count 100 --context 0" |
| 10 | other | 0.216 | 0.900 | 0 | /bin/bash -lc "/usr/bin/time -f 'elapsed=%e exit=%x' env FREECAD_BUSINESS_IDS='[\"Part:desktop:Part_BoxSelection\"]' timeout 60s node tools/part-business-cases.mjs" |
| 11 | other | 0.217 | 0.000 | 0 | /bin/bash -lc 'python3 tools/run_business_acceptance.py --help' |
| 12 | other | 0.076 | 0.001 | 1 | /bin/bash -lc "/usr/bin/time -f 'elapsed=%e exit=%x' env FREECAD_BUSINESS_IDS='[\"Part:desktop:Part_BoxSelection\"]' timeout 60s node tools/part-business-cases.mjs" |
| 13 | other | 0.161 | 4.356 | 1 | /bin/bash -lc 'python3 tools/run_business_acceptance.py --module Part --ids Part:desktop:Part_BoxSelection Part:part.createRecompute --reuse' |
| 14 | source/read | 4.319 | 0.000 | 0 | /bin/bash -lc 'git diff --check -- tools/part-business-cases.mjs' |
| 15 | other | 2.432 | 0.002 | 0 | /bin/bash -lc "python3 -c 'import json; p=\"docs/current/business-evidence/2dc1eba36219dd74b6e30ca3-20260911T142016732130.json\"; d=json.load(open(p)); print(json.dumps(d,ensure_ascii=False)[:14000])'" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.180 | scheduler.cycle.started | thread.started |
| 0.180 | 0.247 | thread.started | turn.started |
| 0.428 | 8.873 | turn.started | agent_message |
| 9.301 | 2.171 | item.completed | command_execution |
| 11.474 | 0.216 | command:source/read | command_execution |
| 11.690 | 0.215 | command:source/read | command_execution |
| 11.906 | 11.406 | command:source/read | command_execution |
| 23.313 | 0.216 | command:source/read | command_execution |
| 23.529 | 12.673 | command:source/read | command_execution |
| 36.204 | 0.217 | command:source/read | command_execution |
| 36.421 | 0.216 | command:source/read | command_execution |
| 36.638 | 15.536 | command:source/read | agent_message |
| 52.173 | 4.788 | item.completed | command_execution |
| 56.963 | 0.216 | command:source/read | command_execution |
| 58.080 | 0.217 | command:other | command_execution |
| 58.297 | 13.545 | command:other | agent_message |
| 71.842 | 17.337 | item.completed | file_change |
| 89.180 | 0.076 | item.completed | command_execution |
| 89.257 | 0.161 | command:other | command_execution |
| 93.775 | 4.319 | command:other | command_execution |
| 98.096 | 13.161 | command:source/read | agent_message |
| 111.256 | 2.432 | item.completed | command_execution |
| 113.691 | 15.357 | command:other | agent_message |
| 129.047 | 26.897 | item.completed | file_change |
| 155.945 | 15.325 | item.completed | agent_message |
| 171.270 | 1.512 | item.completed | turn.completed |
| 172.782 | 2.097 | turn.completed | scheduler.cycle.completed |

## Cycle 7726

Task: FW-P6-FPA-Y; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.054 |
| batchPreflight | 0.048 |
| implementationPacket | 0.655 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7727

Task: FW-P6-FPA-Y; batch: {'id': 'a76993b87501d5bb6e295d35', 'module': 'Material', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.052 |
| batchPreflight | 0.049 |
| implementationPacket | 0.583 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7728

Task: FW-P6-FPA-Y; batch: {'id': '760fc8a0b1e29ac0a1ad3d02', 'module': 'OpenSCAD', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.074 |
| batchPreflight | 0.049 |
| implementationPacket | 0.660 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7729

Task: FW-P6-FPA-Y; batch: {'id': '86c3cb28964322b54d599884', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-mixed', 'records': 8}.
Observed command time (union): 0.018 s; between-event time: 135.149 s; file changes: 2.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.760 |
| batchPreflight | 0.049 |
| implementationPacket | 0.701 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.097 |
| post-pipeline/capability-registry | 4.289 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 3.854 | 0.001 | 0 | /bin/bash -lc "sed -n '1,240p' web/src/techdraw-desktop-adapter.ts" |
| 2 | source/read | 0.215 | 0.001 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/module-implementation-packet.json" |
| 3 | source/read | 0.216 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' docs/UNATTENDED_WORKFLOW.md" |
| 4 | source/read | 0.215 | 0.000 | 0 | /bin/bash -lc "sed -n '1,120p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 5 | source/read | 11.929 | 0.002 | 0 | /bin/bash -lc "sed -n '270,430p' web/src/techdraw-desktop-adapter.ts" |
| 6 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "rg -n 'TechDraw\|techDraw' web/src/workbench-shell.tsx" |
| 7 | source/read | 0.211 | 0.000 | 0 | /bin/bash -lc "sed -n '386,680p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp" |
| 8 | other | 0.212 | 0.000 | 0 | /bin/bash -lc "node -e 'const p=require(\"./docs/current/module-implementation-packet.json\"); console.log(JSON.stringify({records:p.sourceRecords,excerpts:p.editableExcerpts?.filter(x=>"'!x.excerpt)},null,2))'"' " |
| 9 | source/read | 10.709 | 0.001 | 0 | /bin/bash -lc "sed -n '1254,1400p' freecad-source/src/Mod/TechDraw/Gui/CommandAnnotate.cpp" |
| 10 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '363,440p' freecad-source/src/Mod/TechDraw/Gui/CommandStack.cpp" |
| 11 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '378,475p' web/src/workbench-shell.tsx" |
| 12 | source/read | 0.211 | 0.000 | 0 | /bin/bash -lc "sed -n '740,805p' web/src/workbench-shell.tsx" |
| 13 | source/read | 11.752 | 0.001 | 0 | /bin/bash -lc "sed -n '69,165p' freecad-source/src/Mod/TechDraw/Gui/CommandStack.cpp" |
| 14 | source/read | 0.211 | 0.000 | 0 | /bin/bash -lc "sed -n '243,276p' freecad-source/src/Mod/TechDraw/Gui/CommandStack.cpp" |
| 15 | source/read | 19.122 | 0.001 | 0 | /bin/bash -lc "sed -n '726,784p' web/src/workbench-shell.tsx" |
| 16 | source/read | 0.211 | 0.000 | 0 | /bin/bash -lc 'git diff --stat -- web/src/workbench-shell.tsx web/src/techdraw-desktop-adapter.ts' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.174 | scheduler.cycle.started | thread.started |
| 0.203 | 7.745 | turn.started | agent_message |
| 7.948 | 3.854 | item.completed | command_execution |
| 11.804 | 0.215 | command:source/read | command_execution |
| 12.020 | 0.216 | command:source/read | command_execution |
| 12.237 | 0.215 | command:source/read | command_execution |
| 12.452 | 11.929 | command:source/read | command_execution |
| 24.383 | 0.212 | command:source/read | command_execution |
| 24.596 | 0.211 | command:source/read | command_execution |
| 24.808 | 0.212 | command:source/read | command_execution |
| 25.020 | 10.709 | command:other | command_execution |
| 35.731 | 0.212 | command:source/read | command_execution |
| 35.943 | 0.213 | command:source/read | command_execution |
| 36.157 | 0.211 | command:source/read | command_execution |
| 36.368 | 11.752 | command:source/read | command_execution |
| 48.122 | 0.211 | command:source/read | command_execution |
| 48.334 | 9.990 | command:source/read | agent_message |
| 58.324 | 16.291 | item.completed | file_change |
| 74.619 | 19.122 | item.completed | command_execution |
| 93.742 | 0.211 | command:source/read | command_execution |
| 93.954 | 12.911 | command:source/read | agent_message |
| 106.865 | 11.192 | item.completed | file_change |
| 118.059 | 12.974 | item.completed | agent_message |
| 131.032 | 2.755 | item.completed | turn.completed |
| 133.787 | 1.380 | turn.completed | scheduler.cycle.completed |

## Cycle 7730

Task: FW-P6-FPA-Y; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.833 |
| batchPreflight | 0.048 |
| implementationPacket | 0.638 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7731

Task: FW-P6-FPA-Y; batch: {'id': 'ad6d319035418df1de66f85c', 'module': 'BIM', 'tier': 'feature-workflow', 'family': 'desktop-command-initgui', 'records': 16}.
Observed command time (union): 0.018 s; between-event time: 110.312 s; file changes: 3.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.694 |
| batchPreflight | 0.047 |
| implementationPacket | 0.867 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.095 |
| post-pipeline/capability-registry | 4.099 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 2.405 | 0.000 | 64 | /bin/bash -lc 'pwd; git status --short' |
| 2 | source/read | 0.033 | 0.003 | 0 | /bin/bash -lc "sed -n '1,200p' docs/UNATTENDED_WORKFLOW.md" |
| 3 | source/read | 0.216 | 0.000 | 0 | /bin/bash -lc "sed -n '1,150p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 4 | source/read | 0.216 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' web/src/bim-desktop-adapter.ts" |
| 5 | other | 0.216 | 0.001 | 0 | /bin/bash -lc "jq '{sourceRecords,omittedEditableExcerpts,editableExcerpts,businessWorkflow}' docs/current/module-implementation-packet.json" |
| 6 | source/read | 10.867 | 0.001 | 0 | /bin/bash -lc "sed -n '3410,3570p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 7 | source/read | 0.217 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' web/src/bim-desktop-adapter.ts" |
| 8 | source/read | 0.002 | 0.000 | 0 | /bin/bash -lc "sed -n '440,490p' freecad-source/src/Mod/BIM/InitGui.py" |
| 9 | other | 0.217 | 0.000 | 0 | /bin/bash -lc "jq 'keys' docs/current/module-implementation-packet.json" |
| 10 | other | 12.262 | 0.001 | 0 | /bin/bash -lc "jq '{records: [.records[] \| {id,sourcePath,sourceLine,implementation,code,message}], acceptanceSetup, gate}' docs/current/module-implementation-packet.json" |
| 11 | source/read | 0.215 | 0.000 | 0 | /bin/bash -lc "sed -n '3570,3620p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 12 | source/read | 0.216 | 0.000 | 0 | /bin/bash -lc "sed -n '1,90p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 13 | source/read | 0.217 | 0.000 | 2 | /bin/bash -lc "sed -n '1,75p' WEB_BUSINESS_MIGRATION_RULES.md" |
| 14 | source/read | 10.687 | 0.001 | 0 | /bin/bash -lc "sed -n '1,65p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
| 15 | source/read | 0.218 | 0.000 | 0 | /bin/bash -lc 'git status --short -- freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp web/src/bim-desktop-adapter.ts docs/current/bim-frame-pipe-dispatch-repair.md' |
| 16 | other | 31.649 | 0.001 | 0 | /bin/bash -lc "python3 - <<'PY' import ast from pathlib import Path path = Path('freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp') source = path.read_text() start = source.index('import FreeCAD, FreeCADGui\\n', source.index('if (bimDesktopAction)')) end = source.index(')PY\"', start) script = source[start:end] tree = ast.parse(script) outer = next(node for node in tree.body if isinstance(node, ast.Try)) dispatch = next(node for node in outer.body if isinstance(node, ast.If) and ast.unparse(node.test) == '_arch_utils') assert len(dispatch.orelse) == 1 assert ast.unparse(dispatch.orelse[0]) == 'FreeCADGui.runCommand(_command, 0)' assert any(isinstance(node, ast.If) and ast.unparse(node.test) == 'arch_mutating' for node in dispatch.body) print('PASS: selected BIM native script parses; provider dispatch is exclusive to the non-Arch branch') PY" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.170 | scheduler.cycle.started | thread.started |
| 0.198 | 11.951 | turn.started | agent_message |
| 12.149 | 2.405 | item.completed | command_execution |
| 14.591 | 0.216 | command:source/read | command_execution |
| 14.808 | 0.216 | command:source/read | command_execution |
| 15.025 | 0.216 | command:source/read | command_execution |
| 15.242 | 10.867 | command:other | command_execution |
| 26.111 | 0.217 | command:source/read | command_execution |
| 26.332 | 0.217 | command:source/read | command_execution |
| 26.549 | 12.262 | command:other | command_execution |
| 38.812 | 0.215 | command:other | command_execution |
| 39.028 | 0.216 | command:source/read | command_execution |
| 39.245 | 0.217 | command:source/read | command_execution |
| 39.463 | 13.746 | command:source/read | agent_message |
| 53.209 | 10.687 | item.completed | command_execution |
| 63.898 | 0.218 | command:source/read | command_execution |
| 64.116 | 0.217 | command:source/read | file_change |
| 64.334 | 31.649 | item.completed | command_execution |
| 95.984 | 0.215 | command:other | file_change |
| 96.200 | 11.086 | item.completed | agent_message |
| 107.286 | 1.848 | item.completed | turn.completed |
| 109.134 | 1.197 | turn.completed | scheduler.cycle.completed |

## Cycle 7732

Task: FW-P6-FPA-Y; batch: {'id': '39acfe35d7ac28cb0c2561cb', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 16}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.804 |
| batchPreflight | 0.046 |
| implementationPacket | 0.788 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7733

Task: FW-P6-FPA-Y; batch: {'id': 'b692d9adf3bf308d9e7006a3', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 6}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.007 |
| batchPreflight | 0.047 |
| implementationPacket | 0.670 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7734

Task: FW-P6-FPA-Y; batch: {'id': '2d90007902ae6be8f574eb3b', 'module': 'BIM', 'tier': 'feature-workflow', 'family': 'desktop-command-initgui', 'records': 16}.
Observed command time (union): 0.020 s; between-event time: 123.170 s; file changes: 1.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.692 |
| batchPreflight | 0.046 |
| implementationPacket | 0.867 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.096 |
| post-pipeline/capability-registry | 4.091 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 3.552 | 0.003 | 0 | /bin/bash -lc "sed -n '1,220p' docs/current/module-implementation-packet.json" |
| 2 | source/read | 0.215 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 3 | source/read | 0.212 | 0.001 | 0 | /bin/bash -lc "sed -n '1,180p' docs/UNATTENDED_WORKFLOW.md" |
| 4 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' web/src/bim-desktop-adapter.ts" |
| 5 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '3400,3530p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 6 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '435,495p' freecad-source/src/Mod/BIM/InitGui.py" |
| 7 | source/read | 16.931 | 0.001 | 0 | /bin/bash -lc "sed -n '3530,3612p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 8 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,90p' web/src/bim-desktop-adapter.ts" |
| 9 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,100p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 10 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,110p' docs/UNATTENDED_WORKFLOW.md" |
| 11 | other | 0.212 | 0.000 | 0 | /bin/bash -lc "node -e 'const p=require(\"./docs/current/module-implementation-packet.json\"); console.log(JSON.stringify({records:p.sourceRecords,extra:p.editableExcerpts.slice(11)},null,2))'" |
| 12 | other | 12.897 | 0.003 | 0 | /bin/bash -lc "node -e 'const p=require(\"./docs/current/module-implementation-packet.json\"); console.log(Object.keys(p)); console.log(JSON.stringify(p.records,null,2))'" |
| 13 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,85p' docs/current/provided-source-index.md" |
| 14 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,75p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
| 15 | source/read | 2.084 | 0.001 | 0 | /bin/bash -lc "sed -n '1,160p' docs/current/bim-frame-pipe-dispatch-repair.md" |
| 16 | source/read | 0.215 | 0.000 | 0 | /bin/bash -lc "sed -n '385,420p' web/src/workbench-shell.tsx" |
| 17 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '170,240p' web/src/desktop-command-dispatcher.ts" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.156 | scheduler.cycle.started | thread.started |
| 0.181 | 12.843 | turn.started | agent_message |
| 13.025 | 3.552 | item.completed | command_execution |
| 16.580 | 0.215 | command:source/read | command_execution |
| 16.796 | 0.212 | command:source/read | command_execution |
| 17.009 | 0.212 | command:source/read | command_execution |
| 17.222 | 0.213 | command:source/read | command_execution |
| 17.436 | 0.213 | command:source/read | command_execution |
| 17.649 | 16.931 | command:source/read | command_execution |
| 34.582 | 0.213 | command:source/read | command_execution |
| 34.796 | 0.212 | command:source/read | command_execution |
| 35.009 | 0.213 | command:source/read | command_execution |
| 35.222 | 0.212 | command:source/read | command_execution |
| 35.435 | 12.897 | command:other | command_execution |
| 48.335 | 0.213 | command:other | command_execution |
| 48.549 | 0.212 | command:source/read | command_execution |
| 48.762 | 19.474 | command:source/read | agent_message |
| 68.236 | 2.084 | item.completed | command_execution |
| 70.321 | 0.215 | command:source/read | command_execution |
| 70.536 | 0.214 | command:source/read | command_execution |
| 70.751 | 16.225 | command:source/read | agent_message |
| 86.975 | 19.772 | item.completed | file_change |
| 106.754 | 12.992 | item.completed | agent_message |
| 119.746 | 2.161 | item.completed | turn.completed |
| 121.906 | 1.283 | turn.completed | scheduler.cycle.completed |

## Cycle 7735

Task: FW-P6-FPA-Y; batch: {'id': 'ef695c99f86c9ed83f3e44f7', 'module': 'PartDesign', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
Observed command time (union): 0.215 s; between-event time: 83.895 s; file changes: 1.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.799 |
| batchPreflight | 0.047 |
| implementationPacket | 0.557 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/acceptance-contract-preflight | 0.000 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 2.949 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' web/src/partdesign-desktop-adapter.ts" |
| 2 | source/read | 0.212 | 0.001 | 0 | /bin/bash -lc 'cat docs/UNATTENDED_WORKFLOW.md docs/OCCT_GEOMETRY_BOUNDARY.md docs/WEB_BUSINESS_MIGRATION_RULES.md' |
| 3 | source/read | 0.215 | 0.001 | 0 | /bin/bash -lc "rg -n 'setFeature\|Mirrored\|LinearPattern\|Draft\|Hole\|setDress' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignDesktopCommands.cpp freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignRuntimeProbe.cpp web/src/partdesign-facade.ts tools/partdesign-business-cases.mjs" |
| 4 | source/read | 13.450 | 0.001 | 0 | /bin/bash -lc "rg -n 'setFeature\|setDressUp\|setDatum\|featureType\|dressUpType' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignRuntimeProbe.cpp web/src/partdesign-document-facade.ts tools/partdesign-business-cases.mjs" |
| 5 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '1,100p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignDesktopCommands.cpp" |
| 6 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '1297,1335p;2028,2075p;2226,2330p' freecad-source/src/Mod/PartDesign/Gui/Command.cpp" |
| 7 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc 'cat web/src/partdesign-document-facade.ts' |
| 8 | source/read | 14.285 | 0.000 | 0 | /bin/bash -lc "rg -n 'Document\|document' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignRuntimeProbe.cpp" |
| 9 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '1,90p' docs/business-acceptance/PartDesign.json" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.185 | scheduler.cycle.started | thread.started |
| 0.214 | 9.896 | turn.started | agent_message |
| 10.110 | 2.949 | item.completed | command_execution |
| 13.060 | 0.212 | command:source/read | command_execution |
| 13.274 | 0.215 | command:source/read | command_execution |
| 13.696 | 13.450 | command:source/read | command_execution |
| 27.147 | 0.214 | command:source/read | command_execution |
| 27.362 | 0.214 | command:source/read | command_execution |
| 27.576 | 0.213 | command:source/read | command_execution |
| 27.790 | 14.285 | command:source/read | command_execution |
| 42.076 | 0.214 | command:source/read | command_execution |
| 42.291 | 8.839 | command:source/read | agent_message |
| 51.129 | 17.661 | item.completed | file_change |
| 68.792 | 12.957 | item.completed | agent_message |
| 81.749 | 1.483 | item.completed | turn.completed |
| 83.232 | 0.878 | turn.completed | scheduler.cycle.completed |

## Cycle 7736

Task: FW-P6-FPA-Y; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.923 |
| batchPreflight | 0.046 |
| implementationPacket | 0.589 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7737

Task: FW-P6-FPA-Y; batch: {'id': '4fe21f2b12473fc634d0c70d', 'module': 'PartDesign', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 16}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.930 |
| batchPreflight | 0.047 |
| implementationPacket | 0.558 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7738

Task: FW-P6-FPA-Y; batch: {'id': '7b8c7b191e67254e9f69a999', 'module': 'PartDesign', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 6}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.978 |
| batchPreflight | 0.046 |
| implementationPacket | 0.557 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7739

Task: FW-P6-FPA-Y; batch: {'id': '39acfe35d7ac28cb0c2561cb', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 16}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.984 |
| batchPreflight | 0.046 |
| implementationPacket | 0.790 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7740

Task: FW-P6-FPA-Y; batch: {'id': 'b692d9adf3bf308d9e7006a3', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 6}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.000 |
| batchPreflight | 0.045 |
| implementationPacket | 0.654 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7741

Task: FW-P6-FPA-Y; batch: {'id': 'c2a1f52c023e6af5983b4c85', 'module': 'BIM', 'tier': 'feature-workflow', 'family': 'desktop-command-bimarchutils', 'records': 15}.
Observed command time (union): 0.015 s; between-event time: 106.124 s; file changes: 1.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.677 |
| batchPreflight | 0.046 |
| implementationPacket | 0.749 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.094 |
| post-pipeline/capability-registry | 4.067 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 1.705 | 0.001 | 0 | /bin/bash -lc "sed -n '1,220p' web/src/bim-desktop-adapter.ts" |
| 2 | source/read | 0.048 | 0.003 | 0 | /bin/bash -lc 'cat docs/OCCT_GEOMETRY_BOUNDARY.md docs/UNATTENDED_WORKFLOW.md' |
| 3 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1489,1760p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 4 | source/read | 15.571 | 0.002 | 0 | /bin/bash -lc "sed -n '3329,3480p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 5 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '36,560p' freecad-source/src/Mod/BIM/bimcommands/BimArchUtils.py" |
| 6 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '378,420p' web/src/workbench-shell.tsx" |
| 7 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "rg -n 'Arch_\|bimDocument' web/src/workbench-shell.tsx freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 8 | source/read | 12.259 | 0.001 | 0 | /bin/bash -lc "sed -n '3480,3625p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 9 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '787,832p' web/src/workbench-shell.tsx" |
| 10 | source/read | 0.213 | 0.001 | 0 | /bin/bash -lc 'cat docs/current/module-implementation-packet.json' |
| 11 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,100p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
| 12 | source/read | 0.037 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- web/src/bim-desktop-adapter.ts web/src/workbench-shell.tsx docs/current/bim-archutils-integration-boundaries.md' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.160 | scheduler.cycle.started | thread.started |
| 0.188 | 10.042 | turn.started | agent_message |
| 10.230 | 1.705 | item.completed | command_execution |
| 11.987 | 0.213 | command:source/read | command_execution |
| 12.201 | 15.571 | command:source/read | command_execution |
| 27.774 | 0.214 | command:source/read | command_execution |
| 27.988 | 0.213 | command:source/read | command_execution |
| 28.202 | 0.213 | command:source/read | command_execution |
| 28.415 | 12.259 | command:source/read | command_execution |
| 40.676 | 0.214 | command:source/read | command_execution |
| 40.890 | 0.213 | command:source/read | command_execution |
| 41.104 | 0.213 | command:source/read | command_execution |
| 41.318 | 11.713 | command:source/read | agent_message |
| 53.031 | 37.074 | item.completed | file_change |
| 90.147 | 12.447 | command:source/read | agent_message |
| 102.594 | 2.979 | item.completed | turn.completed |
| 105.573 | 0.566 | turn.completed | scheduler.cycle.completed |

## Cycle 7742

Task: FW-P6-FPA-Y; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.791 |
| batchPreflight | 0.046 |
| implementationPacket | 0.610 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7743

Task: FW-P6-FPA-Y; batch: {'id': '39acfe35d7ac28cb0c2561cb', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 16}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.982 |
| batchPreflight | 0.046 |
| implementationPacket | 0.780 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7744

Task: FW-P6-FPA-Y; batch: {'id': 'b692d9adf3bf308d9e7006a3', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 6}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.277 |
| batchPreflight | 0.046 |
| implementationPacket | 0.659 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7745

Task: FW-P6-FPA-Y; batch: {'id': '7f54d3ea4643a0e7a5ac3cf5', 'module': 'BIM', 'tier': 'feature-workflow', 'family': 'desktop-command-initgui', 'records': 13}.
Observed command time (union): 0.018 s; between-event time: 123.120 s; file changes: 1.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 2.131 |
| batchPreflight | 0.046 |
| implementationPacket | 0.823 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.094 |
| post-pipeline/capability-registry | 4.081 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | other | 3.119 | 0.000 | 0 | /bin/bash -lc pwd |
| 2 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/UNATTENDED_WORKFLOW.md" |
| 3 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,140p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 4 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' web/src/bim-desktop-adapter.ts" |
| 5 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '450,490p' freecad-source/src/Mod/BIM/InitGui.py" |
| 6 | source/read | 0.212 | 0.001 | 0 | /bin/bash -lc "sed -n '3420,3890p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 7 | source/read | 15.714 | 0.001 | 0 | /bin/bash -lc "sed -n '1,230p' web/src/bim-desktop-adapter.ts" |
| 8 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '3420,3605p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 9 | other | 0.212 | 0.000 | 0 | /bin/bash -lc "jq '{sourceRecords,editableExcerpts: [.editableExcerpts[] \| select(.path\|contains(\"bim-desktop\"))]}' docs/current/module-implementation-packet.json" |
| 10 | source/read | 15.032 | 0.000 | 0 | /bin/bash -lc "sed -n '440,490p' freecad-source/src/Mod/BIM/InitGui.py" |
| 11 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,100p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 12 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,90p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
| 13 | other | 0.212 | 0.000 | 0 | /bin/bash -lc "jq 'keys' docs/current/module-implementation-packet.json" |
| 14 | other | 2.397 | 0.002 | 0 | /bin/bash -lc "jq '{records,acceptanceContract,acceptanceSetup}' docs/current/module-implementation-packet.json" |
| 15 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '380,415p' web/src/workbench-shell.tsx" |
| 16 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "rg -n 'CommandsFrame\|CommandsPipe\|flamingo' docs/current/provided-source-index.md freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 17 | source/read | 0.037 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- web/src/bim-desktop-adapter.ts freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp docs/current/bim-batch-7f54d3ea-boundaries.md' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.148 | scheduler.cycle.started | thread.started |
| 0.169 | 12.174 | turn.started | agent_message |
| 12.343 | 3.119 | item.completed | command_execution |
| 15.463 | 0.214 | command:other | command_execution |
| 15.678 | 0.212 | command:source/read | command_execution |
| 15.890 | 0.212 | command:source/read | command_execution |
| 16.104 | 0.212 | command:source/read | command_execution |
| 16.316 | 0.212 | command:source/read | command_execution |
| 16.529 | 15.714 | command:source/read | command_execution |
| 32.244 | 0.213 | command:source/read | command_execution |
| 32.459 | 0.212 | command:source/read | command_execution |
| 32.672 | 15.032 | command:other | command_execution |
| 47.705 | 0.212 | command:source/read | command_execution |
| 47.918 | 0.213 | command:source/read | command_execution |
| 48.132 | 0.212 | command:source/read | command_execution |
| 48.344 | 11.202 | command:other | agent_message |
| 59.547 | 2.397 | item.completed | command_execution |
| 61.947 | 0.213 | command:other | command_execution |
| 62.161 | 0.212 | command:source/read | command_execution |
| 62.374 | 12.227 | command:source/read | agent_message |
| 74.600 | 30.657 | item.completed | file_change |
| 105.303 | 14.560 | command:source/read | agent_message |
| 119.862 | 2.584 | item.completed | turn.completed |
| 122.446 | 0.692 | turn.completed | scheduler.cycle.completed |

## Cycle 7746

Task: FW-P6-FPA-Y; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.790 |
| batchPreflight | 0.046 |
| implementationPacket | 0.607 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7747

Task: FW-P6-FPA-Y; batch: {'id': '39acfe35d7ac28cb0c2561cb', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 16}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.990 |
| batchPreflight | 0.046 |
| implementationPacket | 0.796 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7748

Task: FW-P6-FPA-Y; batch: {'id': 'b692d9adf3bf308d9e7006a3', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 6}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.002 |
| batchPreflight | 0.046 |
| implementationPacket | 0.657 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7749

Task: FW-P6-FPA-Y; batch: {'id': '3d4d126ab9e4913c20a6feab', 'module': 'BIM', 'tier': 'feature-workflow', 'family': 'desktop-command-mixed', 'records': 8}.
Observed command time (union): 0.017 s; between-event time: 144.252 s; file changes: 3.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.680 |
| batchPreflight | 0.046 |
| implementationPacket | 0.667 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.094 |
| post-pipeline/capability-registry | 4.082 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 1.855 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' web/src/bim-desktop-adapter.ts" |
| 2 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,280p' freecad-source/src/Mod/BIM/nativeifc/ifc_commands.py" |
| 3 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 4 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/UNATTENDED_WORKFLOW.md" |
| 5 | source/read | 13.690 | 0.002 | 0 | /bin/bash -lc "rg -n 'desktop\|Arch_Panel\|Arch_Nest\|workflow\|run.*Script' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 6 | source/read | 0.217 | 0.000 | 0 | /bin/bash -lc "sed -n '48,180p' freecad-source/src/Mod/BIM/bimcommands/BimPanel.py" |
| 7 | source/read | 0.215 | 0.000 | 0 | /bin/bash -lc "sed -n '352,440p' freecad-source/src/Mod/BIM/bimcommands/BimPanel.py" |
| 8 | source/read | 0.215 | 0.000 | 0 | /bin/bash -lc "sed -n '174,248p' freecad-source/src/Mod/BIM/nativeifc/ifc_commands.py" |
| 9 | source/read | 9.770 | 0.001 | 0 | /bin/bash -lc "sed -n '3380,3605p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 10 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '3730,3778p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 11 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,90p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 12 | source/read | 4.332 | 0.001 | 0 | /bin/bash -lc "sed -n '4105,4150p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 13 | source/read | 0.217 | 0.000 | 0 | /bin/bash -lc "sed -n '380,410p' web/src/workbench-shell.tsx" |
| 14 | source/read | 0.216 | 0.000 | 0 | /bin/bash -lc "sed -n '285,320p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 15 | other | 0.033 | 0.001 | 127 | /bin/bash -lc './node_modules/.bin/tsc --noEmit -p tsconfig.json' |
| 16 | source/read | 0.037 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- web/src/bim-desktop-adapter.ts freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp docs/current/bim-panel-ifc-boundaries.md' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.151 | scheduler.cycle.started | thread.started |
| 0.170 | 8.804 | turn.started | agent_message |
| 8.974 | 1.855 | item.completed | command_execution |
| 10.829 | 0.212 | command:source/read | command_execution |
| 11.043 | 0.212 | command:source/read | command_execution |
| 11.255 | 0.213 | command:source/read | command_execution |
| 11.469 | 13.690 | command:source/read | command_execution |
| 25.161 | 0.217 | command:source/read | command_execution |
| 25.379 | 0.215 | command:source/read | command_execution |
| 25.595 | 0.215 | command:source/read | command_execution |
| 25.811 | 9.770 | command:source/read | command_execution |
| 35.582 | 0.213 | command:source/read | command_execution |
| 35.797 | 0.212 | command:source/read | command_execution |
| 36.010 | 8.674 | command:source/read | agent_message |
| 44.684 | 4.332 | item.completed | command_execution |
| 49.017 | 0.217 | command:source/read | command_execution |
| 49.235 | 0.216 | command:source/read | command_execution |
| 49.452 | 49.407 | command:source/read | file_change |
| 98.871 | 14.725 | item.completed | agent_message |
| 113.596 | 16.260 | item.completed | file_change |
| 129.930 | 10.702 | command:source/read | agent_message |
| 140.632 | 2.464 | item.completed | turn.completed |
| 143.096 | 1.173 | turn.completed | scheduler.cycle.completed |

## Cycle 7750

Task: FW-P6-FPA-Y; batch: {'id': 'ef695c99f86c9ed83f3e44f7', 'module': 'PartDesign', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
Observed command time (union): 0.021 s; between-event time: 262.241 s; file changes: 2.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.899 |
| batchPreflight | 0.046 |
| implementationPacket | 0.556 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/acceptance-contract-preflight | 0.000 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 3.122 | 0.002 | 0 | /bin/bash -lc "sed -n '1,220p' docs/current/module-implementation-packet.json" |
| 2 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/UNATTENDED_WORKFLOW.md" |
| 3 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 4 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' web/src/partdesign-desktop-adapter.ts" |
| 5 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignDocumentWorkflow.cpp" |
| 6 | source/read | 11.107 | 0.002 | 0 | /bin/bash -lc "sed -n '240,570p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignDocumentWorkflow.cpp" |
| 7 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '2028,2068p;2226,2338p;1297,1340p' freecad-source/src/Mod/PartDesign/Gui/Command.cpp" |
| 8 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' web/src/partdesign-document-facade.ts" |
| 9 | source/read | 12.575 | 0.001 | 0 | /bin/bash -lc "sed -n '489,615p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignDocumentWorkflow.cpp" |
| 10 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '1,35p' web/src/partdesign-desktop-adapter.ts" |
| 11 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,125p' docs/UNATTENDED_WORKFLOW.md" |
| 12 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,100p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 13 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,120p' freecad-source/src/Mod/PartDesign/App/FeatureHole.h" |
| 14 | source/read | 2.931 | 0.001 | 0 | /bin/bash -lc "sed -n '445,490p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignDocumentWorkflow.cpp" |
| 15 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "rg -n 'DepthType\|DrillPoint\|HoleCutType\|Threaded' freecad-source/src/Mod/PartDesign/App/FeatureHole.cpp" |
| 16 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '160,340p' tools/partdesign-business-cases.mjs" |
| 17 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '1,85p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
| 18 | source/read | 17.025 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignDocumentWorkflow.cpp web/src/partdesign-document-facade.ts web/src/partdesign-desktop-adapter.ts tools/partdesign-business-cases.mjs docs/business-acceptance/PartDesign.json' |
| 19 | other | 0.214 | 0.000 | 0 | /bin/bash -lc 'node --check tools/partdesign-business-cases.mjs' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.154 | scheduler.cycle.started | thread.started |
| 0.189 | 9.638 | turn.started | agent_message |
| 9.827 | 3.122 | item.completed | command_execution |
| 12.952 | 0.213 | command:source/read | command_execution |
| 13.166 | 0.213 | command:source/read | command_execution |
| 13.379 | 0.212 | command:source/read | command_execution |
| 13.592 | 0.212 | command:source/read | command_execution |
| 13.805 | 11.107 | command:source/read | command_execution |
| 24.915 | 0.214 | command:source/read | command_execution |
| 25.130 | 0.213 | command:source/read | command_execution |
| 25.343 | 12.575 | command:source/read | command_execution |
| 37.920 | 0.214 | command:source/read | command_execution |
| 38.134 | 0.212 | command:source/read | command_execution |
| 38.347 | 0.212 | command:source/read | command_execution |
| 38.560 | 0.212 | command:source/read | command_execution |
| 38.773 | 13.757 | command:source/read | agent_message |
| 52.530 | 2.931 | item.completed | command_execution |
| 55.462 | 0.213 | command:source/read | command_execution |
| 55.676 | 0.213 | command:source/read | command_execution |
| 55.890 | 0.214 | command:source/read | command_execution |
| 56.104 | 50.804 | command:source/read | file_change |
| 106.911 | 49.249 | item.completed | agent_message |
| 156.159 | 69.947 | item.completed | file_change |
| 226.108 | 17.025 | item.completed | command_execution |
| 243.135 | 0.214 | command:source/read | command_execution |
| 243.350 | 14.905 | command:other | agent_message |
| 258.255 | 2.985 | item.completed | turn.completed |
| 261.241 | 1.021 | turn.completed | scheduler.cycle.completed |

## Cycle 7751

Task: UNATTENDED-OPTIMIZATION; batch: {'id': 'ef695c99f86c9ed83f3e44f7', 'module': 'PartDesign', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
Observed command time (union): 2.429 s; between-event time: 234.892 s; file changes: 3.

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 0.463 | 0.003 | 0 | /bin/bash -lc "sed -n '1,220p' docs/UNATTENDED_WORKFLOW.md; sed -n '1,180p' docs/current/provided-source-index.md; cat docs/current/periodic-optimization/optimization-000175-context.json" |
| 2 | source/read | 13.904 | 0.002 | 0 | /bin/bash -lc 'cat tools/fast_source_search.py docs/current/provided-source-index.md docs/WEB_BUSINESS_MIGRATION_RULES.md' |
| 3 | source/read | 13.704 | 0.002 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py 'BoxSelection\|boxSelection' --path freecad-source/src/Mod/Part/Gui --path freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp --path web/src/part-desktop-adapter.ts --path tools/part-fixed-box-business-cases.mjs --context 5 --max-count 150" |
| 4 | source/read | 10.309 | 0.003 | 0 | /bin/bash -lc "sed -n '80,340p' freecad-source/src/Mod/Part/Gui/BoxSelection.cpp; cat web/src/part-desktop-adapter.ts; python3 tools/fast_source_search.py 'BoxSelection\|boxSelection' --path freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp --context 12 --max-count 120" |
| 5 | source/read | 2.504 | 0.003 | 0 | /bin/bash -lc "sed -n '1,150p' tools/part-business-cases.mjs; cat docs/business-acceptance/Part.json; sed -n '1,110p' tools/part-primitive-business-cases.mjs; python3 tools/run_business_acceptance.py --help" |
| 6 | other | 13.319 | 0.017 | 1 | /bin/bash -lc 'python3 tools/run_business_acceptance.py --module Part --ids Part:desktop:Part_BoxSelection --reuse' |
| 7 | source/read | 11.706 | 0.002 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py 'invalid business case report\|returncode\|json.loads\|def .*report' --path tools/run_business_acceptance.py --context 9 --max-count 180; cat tools/business-report.mjs; tail -25 tools/part-business-cases.mjs" |
| 8 | source/read | 3.277 | 0.002 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py 'partial_exit\|invalid business case report\|run_business_acceptance\|def successful_result' --path tools --glob '*test*business*' --glob 'business_acceptance.py' --context 2 --max-count 100; sed -n '270,292p' tools/run_business_acceptance.py" |
| 9 | other | 0.159 | 1.511 | 0 | /bin/bash -lc 'python3 -m unittest tools.test_business_migration tools.test_business_evidence_reuse tools.test_scheduler_business_recovery' |
| 10 | source/read | 16.610 | 0.001 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py 'nonzero\|partial\|returncode\|invalid.*report\|def test_' --path tools/test_business_evidence_reuse.py --context 4 --max-count 160" |
| 11 | other | 0.159 | 0.876 | 0 | /bin/bash -lc 'python3 -m unittest tools.test_business_evidence_reuse' |
| 12 | other | 0.216 | 0.000 | 1 | /bin/bash -lc 'python3 tools/run_business_acceptance.py --module Part --ids Part:desktop:Part_BoxSelection --reuse' |
| 13 | source/read | 0.038 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- tools/run_business_acceptance.py tools/test_business_evidence_reuse.py docs/current/periodic-optimization/optimization-000175.md' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.148 | scheduler.cycle.started | thread.started |
| 0.173 | 9.946 | turn.started | agent_message |
| 10.119 | 0.463 | item.completed | command_execution |
| 10.586 | 13.904 | command:source/read | command_execution |
| 24.492 | 13.704 | command:source/read | command_execution |
| 38.198 | 10.309 | command:source/read | command_execution |
| 48.511 | 11.041 | command:source/read | agent_message |
| 59.552 | 2.504 | item.completed | command_execution |
| 62.059 | 13.319 | command:source/read | command_execution |
| 75.396 | 11.706 | command:other | command_execution |
| 87.104 | 17.531 | command:source/read | agent_message |
| 104.635 | 3.277 | item.completed | command_execution |
| 107.914 | 17.943 | command:source/read | file_change |
| 125.858 | 0.159 | item.completed | command_execution |
| 127.528 | 16.610 | command:other | command_execution |
| 144.140 | 20.194 | command:source/read | agent_message |
| 164.334 | 5.843 | item.completed | file_change |
| 170.179 | 0.159 | item.completed | command_execution |
| 171.213 | 0.216 | command:other | command_execution |
| 171.430 | 12.873 | command:other | agent_message |
| 184.303 | 27.448 | item.completed | file_change |
| 211.791 | 22.394 | command:source/read | agent_message |
| 234.185 | 2.252 | item.completed | turn.completed |
| 236.437 | 0.884 | turn.completed | scheduler.cycle.completed |

## Cycle 7752

Task: FW-P6-FPA-Y; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.734 |
| batchPreflight | 0.046 |
| implementationPacket | 0.581 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7753

Task: FW-P6-FPA-Y; batch: {'id': '4fe21f2b12473fc634d0c70d', 'module': 'PartDesign', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 16}.
Observed command time (union): 0.000 s; between-event time: 33.070 s; file changes: 1.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.923 |
| batchPreflight | 0.046 |
| implementationPacket | 0.553 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/cmake-regenerate | 26.140 |
| post-pipeline/preflight | 0.067 |
| post-pipeline/build | 37.256 |
| post-pipeline/artifact-sync | 1.359 |
| post-pipeline/business-acceptance | 55.990 |
| post-pipeline/business-audit | 0.963 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.148 | scheduler.cycle.started | thread.started |
| 0.168 | 13.462 | turn.started | agent_message |
| 13.629 | 1.750 | item.completed | file_change |
| 15.381 | 13.641 | item.completed | agent_message |
| 29.022 | 3.328 | item.completed | turn.completed |
| 32.349 | 0.721 | turn.completed | scheduler.cycle.completed |

## Cycle 7754

Task: FW-P6-FPA-Y; batch: {'id': '7b8c7b191e67254e9f69a999', 'module': 'PartDesign', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 6}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.979 |
| batchPreflight | 0.046 |
| implementationPacket | 0.559 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7755

Task: FW-P6-FPA-Y; batch: {'id': '39acfe35d7ac28cb0c2561cb', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 16}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.980 |
| batchPreflight | 0.046 |
| implementationPacket | 0.784 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7756

Task: FW-P6-FPA-Y; batch: {'id': 'b692d9adf3bf308d9e7006a3', 'module': 'BIM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 6}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.995 |
| batchPreflight | 0.046 |
| implementationPacket | 0.653 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7757

Task: FW-P6-FPA-Y; batch: {'id': '8a630fd083fb795bd43f7da8', 'module': 'BIM', 'tier': 'feature-workflow', 'family': 'desktop-command-bimarchutils', 'records': 4}.
Observed command time (union): 0.019 s; between-event time: 152.139 s; file changes: 2.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.678 |
| batchPreflight | 0.046 |
| implementationPacket | 0.661 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.095 |
| post-pipeline/capability-registry | 4.070 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 2.081 | 0.001 | 0 | /bin/bash -lc "sed -n '1,220p' docs/current/module-implementation-packet.json" |
| 2 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/UNATTENDED_WORKFLOW.md" |
| 3 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 4 | source/read | 16.244 | 0.001 | 0 | /bin/bash -lc "sed -n '1,260p' web/src/bim-desktop-adapter.ts" |
| 5 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '36,125p' freecad-source/src/Mod/BIM/bimcommands/BimArchUtils.py" |
| 6 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '293,465p' freecad-source/src/Mod/BIM/bimcommands/BimArchUtils.py" |
| 7 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1490,1550p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 8 | source/read | 10.927 | 0.002 | 0 | /bin/bash -lc "sed -n '3750,3960p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 9 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '390,420p' web/src/workbench-shell.tsx" |
| 10 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "rg -n 'bimDocument\|Arch_Add\|Arch_Check\|Arch_CloseHoles\|Arch_CloneComponent' web/src/workbench-shell.tsx freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 11 | source/read | 12.268 | 0.001 | 0 | /bin/bash -lc "sed -n '3380,3445p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 12 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '3445,3570p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 13 | source/read | 12.582 | 0.001 | 0 | /bin/bash -lc "sed -n '3570,3645p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 14 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '780,855p' web/src/workbench-shell.tsx" |
| 15 | source/read | 0.037 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- web/src/bim-desktop-adapter.ts web/src/workbench-shell.tsx freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp docs/current/bim-archutils-batch-8a630fd083fb795bd43f7da8.md' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.149 | scheduler.cycle.started | thread.started |
| 0.176 | 13.424 | turn.started | agent_message |
| 13.600 | 2.081 | item.completed | command_execution |
| 15.684 | 0.214 | command:source/read | command_execution |
| 15.899 | 0.212 | command:source/read | command_execution |
| 16.112 | 16.244 | command:source/read | command_execution |
| 32.358 | 0.214 | command:source/read | command_execution |
| 32.572 | 0.213 | command:source/read | command_execution |
| 32.786 | 0.213 | command:source/read | command_execution |
| 33.000 | 10.927 | command:source/read | command_execution |
| 43.929 | 0.214 | command:source/read | command_execution |
| 44.144 | 0.213 | command:source/read | command_execution |
| 44.358 | 12.268 | command:source/read | command_execution |
| 56.628 | 0.213 | command:source/read | command_execution |
| 56.842 | 12.582 | command:source/read | command_execution |
| 69.425 | 0.213 | command:source/read | command_execution |
| 69.639 | 17.580 | command:source/read | agent_message |
| 87.219 | 23.753 | item.completed | file_change |
| 110.981 | 12.988 | item.completed | agent_message |
| 123.969 | 12.807 | item.completed | file_change |
| 136.815 | 12.041 | command:source/read | agent_message |
| 148.856 | 2.156 | item.completed | turn.completed |
| 151.012 | 1.147 | turn.completed | scheduler.cycle.completed |

## Cycle 7758

Task: FW-P6-FPA-Y; batch: {'id': '8a630fd083fb795bd43f7da8', 'module': 'BIM', 'tier': 'feature-workflow', 'family': 'desktop-command-bimarchutils', 'records': 4}.
Observed command time (union): 0.015 s; between-event time: 142.153 s; file changes: 3.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.402 |
| batchPreflight | 0.046 |
| implementationPacket | 0.646 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.096 |
| post-pipeline/capability-registry | 4.141 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 3.224 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' web/src/bim-desktop-adapter.ts" |
| 2 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/bim-archutils-batch-8a630fd083fb795bd43f7da8.md" |
| 3 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' docs/UNATTENDED_WORKFLOW.md" |
| 4 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,120p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 5 | source/read | 24.270 | 0.002 | 0 | /bin/bash -lc "sed -n '1498,1735p' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp" |
| 6 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '293,480p' freecad-source/src/Mod/BIM/bimcommands/BimArchUtils.py" |
| 7 | source/read | 0.211 | 0.000 | 0 | /bin/bash -lc "sed -n '36,140p' freecad-source/src/Mod/BIM/bimcommands/BimArchUtils.py" |
| 8 | source/read | 10.179 | 0.001 | 0 | /bin/bash -lc "rg -n 'Arch_Check\|Arch_CloseHoles\|selectionEx\|subelements\|bimDocument' freecad-source/src/WebAssembly/FreeCADCoreProbe/BimRuntimeProbe.cpp web/src/workbench-shell.tsx" |
| 9 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,110p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
| 10 | source/read | 8.182 | 0.001 | 0 | /bin/bash -lc "sed -n '378,425p' web/src/workbench-shell.tsx" |
| 11 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '750,825p' web/src/workbench-shell.tsx" |
| 12 | source/read | 0.033 | 0.001 | 0 | /bin/bash -lc "sed -n '1,18p' web/src/workbench-shell.tsx" |
| 13 | source/read | 0.038 | 0.002 | 0 | /bin/bash -lc 'git diff --check -- web/src/bim-desktop-adapter.ts web/src/workbench-shell.tsx docs/current/bim-archutils-batch-8a630fd083fb795bd43f7da8.md' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.152 | scheduler.cycle.started | thread.started |
| 0.177 | 12.087 | turn.started | agent_message |
| 12.264 | 3.224 | item.completed | command_execution |
| 15.489 | 0.212 | command:source/read | command_execution |
| 15.702 | 0.212 | command:source/read | command_execution |
| 15.915 | 0.213 | command:source/read | command_execution |
| 16.128 | 24.270 | command:source/read | command_execution |
| 40.401 | 0.212 | command:source/read | command_execution |
| 40.614 | 0.211 | command:source/read | command_execution |
| 40.826 | 10.179 | command:source/read | command_execution |
| 51.007 | 0.213 | command:source/read | command_execution |
| 51.220 | 8.182 | command:source/read | command_execution |
| 59.404 | 0.213 | command:source/read | command_execution |
| 59.618 | 12.653 | command:source/read | agent_message |
| 72.271 | 14.442 | item.completed | file_change |
| 86.716 | 20.490 | item.completed | file_change |
| 107.243 | 17.792 | command:source/read | file_change |
| 125.077 | 13.755 | command:source/read | agent_message |
| 138.832 | 1.848 | item.completed | turn.completed |
| 140.681 | 1.487 | turn.completed | scheduler.cycle.completed |

## Cycle 7759

Task: FW-P6-FPA-Y; batch: {'id': 'b5d6591f3a9aba45092535ca', 'module': 'Part', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
Observed command time (union): 0.011 s; between-event time: 89.113 s; file changes: 1.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.795 |
| batchPreflight | 0.046 |
| implementationPacket | 0.580 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/acceptance-contract-preflight | 0.000 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 1.211 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' web/src/part-desktop-adapter.ts" |
| 2 | source/read | 0.212 | 0.001 | 0 | /bin/bash -lc 'cat docs/OCCT_GEOMETRY_BOUNDARY.md docs/UNATTENDED_WORKFLOW.md docs/WEB_BUSINESS_MIGRATION_RULES.md' |
| 3 | source/read | 0.213 | 0.001 | 0 | /bin/bash -lc "sed -n '1,180p' docs/current/module-implementation-packet.json" |
| 4 | source/read | 13.656 | 0.002 | 0 | /bin/bash -lc "rg -n 'BoxSelection\|Builder\|Chamfer\|CheckGeometry\|documentOperation' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp web/src/workbench-shell.tsx web/src/part-desktop-adapter.ts freecad-source/src/WebAssembly/FreeCADCoreProbe/PartBoxProbe.cpp" |
| 5 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc 'cat docs/WEB_BUSINESS_MIGRATION_RULES.md' |
| 6 | source/read | 12.888 | 0.002 | 0 | /bin/bash -lc "sed -n '1680,1702p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp; sed -n '224,320p' web/src/part-desktop-adapter.ts; sed -n '4160,4245p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartBoxProbe.cpp" |
| 7 | source/read | 0.214 | 0.001 | 0 | /bin/bash -lc "rg -n 'Part_CheckGeometry\|Part_Builder\|Part_Chamfer\|Part_BoxSelection\|partDesktop' web/src/workbench-shell.tsx; sed -n '1,95p' tools/part-business-cases.mjs; sed -n '1,80p' docs/business-acceptance/Part.json" |
| 8 | source/read | 0.037 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- web/src/part-desktop-adapter.ts docs/current/part-b5d6591f-boundaries.md' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.152 | scheduler.cycle.started | thread.started |
| 0.184 | 9.117 | turn.started | agent_message |
| 9.301 | 1.211 | item.completed | command_execution |
| 10.513 | 0.212 | command:source/read | command_execution |
| 10.726 | 0.213 | command:source/read | command_execution |
| 10.940 | 13.656 | command:source/read | command_execution |
| 24.599 | 0.213 | command:source/read | command_execution |
| 24.813 | 12.888 | command:source/read | command_execution |
| 37.703 | 0.214 | command:source/read | command_execution |
| 37.918 | 15.413 | command:source/read | agent_message |
| 53.331 | 20.555 | item.completed | file_change |
| 73.927 | 11.560 | command:source/read | agent_message |
| 85.487 | 2.569 | item.completed | turn.completed |
| 88.056 | 1.068 | turn.completed | scheduler.cycle.completed |

## Cycle 7760

Task: FW-P6-FPA-Y; batch: {'id': '69fe39ac4430b2f5f2e1b255', 'module': 'Part', 'tier': 'feature-workflow', 'family': 'runtime-issue', 'records': 3}.
Observed command time (union): 0.015 s; between-event time: 99.224 s; file changes: 1.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.665 |
| batchPreflight | 0.046 |
| implementationPacket | 0.577 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/acceptance-contract-preflight | 0.000 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 1.005 | 0.000 | 64 | /bin/bash -lc 'pwd; git status --short' |
| 2 | source/read | 0.033 | 0.004 | 0 | /bin/bash -lc "sed -n '1,220p' docs/current/module-implementation-packet.json" |
| 3 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/UNATTENDED_WORKFLOW.md" |
| 4 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 5 | other | 12.529 | 0.001 | 0 | /bin/bash -lc "node -e 'const p=require(\"./docs/current/module-implementation-packet.json\"); console.log(JSON.stringify({records:p.sourceRecords,excerpts:p.editableExcerpts?.slice(9)},null,2))'" |
| 6 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '1,255p' web/src/part-desktop-adapter.ts" |
| 7 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1,85p' tools/part-business-cases.mjs; sed -n '1,85p' docs/business-acceptance/Part.json" |
| 8 | source/read | 10.579 | 0.001 | 0 | /bin/bash -lc "rg -n 'Part_Builder\|Part_Chamfer\|Part_BoxSelection\|builder\|chamfer' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp web/src/part-desktop-adapter.ts web/src/workbench-shell.tsx" |
| 9 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '1628,1770p' freecad-source/src/Mod/Part/Gui/Command.cpp; sed -n '2415,2465p' freecad-source/src/Mod/Part/Gui/Command.cpp" |
| 10 | source/read | 13.827 | 0.002 | 0 | /bin/bash -lc "sed -n '346,485p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp; sed -n '260,460p' web/src/part-desktop-adapter.ts" |
| 11 | source/read | 0.038 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- web/src/part-desktop-adapter.ts docs/business-acceptance/Part.json' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.160 | scheduler.cycle.started | thread.started |
| 0.192 | 11.677 | turn.started | agent_message |
| 11.869 | 1.005 | item.completed | command_execution |
| 12.912 | 0.214 | command:source/read | command_execution |
| 13.127 | 0.212 | command:source/read | command_execution |
| 13.339 | 12.529 | command:source/read | command_execution |
| 25.870 | 0.214 | command:other | command_execution |
| 26.084 | 0.213 | command:source/read | command_execution |
| 26.298 | 10.579 | command:source/read | command_execution |
| 36.878 | 0.213 | command:source/read | command_execution |
| 37.092 | 13.827 | command:source/read | command_execution |
| 50.921 | 11.944 | command:source/read | agent_message |
| 62.864 | 16.696 | item.completed | file_change |
| 79.601 | 15.110 | command:source/read | agent_message |
| 94.711 | 3.081 | item.completed | turn.completed |
| 97.792 | 1.447 | turn.completed | scheduler.cycle.completed |

## Cycle 7761

Task: FW-P6-FPA-Y; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.790 |
| batchPreflight | 0.046 |
| implementationPacket | 0.611 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7762

Task: FW-P6-FPA-Y; batch: {'id': 'd66ed33b497d3b2863891e20', 'module': 'Draft', 'tier': 'feature-workflow', 'family': 'desktop-command-mixed', 'records': 8}.
Observed command time (union): 0.013 s; between-event time: 173.257 s; file changes: 5.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.635 |
| batchPreflight | 0.047 |
| implementationPacket | 0.683 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.094 |
| post-pipeline/capability-registry | 4.095 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 2.505 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' web/src/draft-desktop-adapter.ts" |
| 2 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "sed -n '430,730p' freecad-source/src/WebAssembly/FreeCADCoreProbe/DraftRuntimeProbe.cpp" |
| 3 | source/read | 0.211 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/UNATTENDED_WORKFLOW.md" |
| 4 | source/read | 0.211 | 0.000 | 0 | /bin/bash -lc "sed -n '1,150p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
| 5 | source/read | 10.723 | 0.002 | 0 | /bin/bash -lc "sed -n '83,490p' freecad-source/src/Mod/Draft/draftguitools/gui_groups.py" |
| 6 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '80,340p' freecad-source/src/Mod/Draft/draftguitools/gui_layers.py" |
| 7 | source/read | 0.212 | 0.000 | 0 | /bin/bash -lc "rg -n 'draft\|Draft\|applySelection' web/src/desktop-command-dispatcher.ts web/src/workbench-shell.tsx" |
| 8 | source/read | 1.835 | 0.001 | 0 | /bin/bash -lc "sed -n '1,48p' web/src/workbench-shell.tsx" |
| 9 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "sed -n '103,118p' web/src/desktop-command-dispatcher.ts" |
| 10 | source/read | 0.213 | 0.000 | 0 | /bin/bash -lc "sed -n '750,780p' web/src/workbench-shell.tsx" |
| 11 | other | 0.033 | 0.001 | 127 | /bin/bash -lc './node_modules/.bin/tsc --noEmit -p tsconfig.json' |
| 12 | source/read | 0.037 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- web/src/draft-desktop-adapter.ts web/src/workbench-shell.tsx freecad-source/src/WebAssembly/FreeCADCoreProbe/DraftRuntimeProbe.cpp' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.154 | scheduler.cycle.started | thread.started |
| 0.188 | 11.354 | turn.started | agent_message |
| 11.541 | 2.505 | item.completed | command_execution |
| 14.047 | 0.212 | command:source/read | command_execution |
| 14.260 | 0.211 | command:source/read | command_execution |
| 14.472 | 0.211 | command:source/read | command_execution |
| 14.684 | 10.723 | command:source/read | command_execution |
| 25.409 | 0.214 | command:source/read | command_execution |
| 25.623 | 0.212 | command:source/read | command_execution |
| 25.836 | 11.243 | command:source/read | agent_message |
| 37.079 | 1.835 | item.completed | command_execution |
| 38.915 | 0.214 | command:source/read | command_execution |
| 39.130 | 0.213 | command:source/read | command_execution |
| 39.344 | 59.241 | command:source/read | file_change |
| 98.593 | 32.351 | item.completed | file_change |
| 130.981 | 15.930 | command:other | agent_message |
| 146.911 | 9.734 | item.completed | file_change |
| 156.691 | 13.571 | command:source/read | agent_message |
| 170.262 | 2.361 | item.completed | turn.completed |
| 172.623 | 0.648 | turn.completed | scheduler.cycle.completed |

## Cycle 7763

Task: FW-P6-FPA-Y; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.992 |
| batchPreflight | 0.046 |
| implementationPacket | 0.607 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7764

Task: FW-P6-FPA-Y; batch: {'id': 'f0c973d91d81e02d77383b27', 'module': 'Draft', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.978 |
| batchPreflight | 0.046 |
| implementationPacket | 0.556 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 7765

Task: FW-P6-FPA-Y; batch: {'id': '197f7cf07996158d95492ff1', 'module': 'Draft', 'tier': 'feature-workflow', 'family': 'desktop-command-gui_groups', 'records': 4}.
Observed command time (union): 0.016 s; between-event time: 146.160 s; file changes: 2.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.634 |
| batchPreflight | 0.045 |
| implementationPacket | 0.636 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.098 |
| post-pipeline/capability-registry | 4.233 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 2.342 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' web/src/draft-desktop-adapter.ts" |
| 2 | source/read | 0.216 | 0.000 | 0 | /bin/bash -lc "sed -n '1,490p' freecad-source/src/Mod/Draft/draftguitools/gui_groups.py" |
| 3 | source/read | 0.215 | 0.000 | 0 | /bin/bash -lc "sed -n '440,640p' freecad-source/src/WebAssembly/FreeCADCoreProbe/DraftRuntimeProbe.cpp" |
| 4 | source/read | 0.216 | 0.001 | 0 | /bin/bash -lc 'cat docs/OCCT_GEOMETRY_BOUNDARY.md docs/UNATTENDED_WORKFLOW.md' |
| 5 | source/read | 12.649 | 0.001 | 0 | /bin/bash -lc "sed -n '470,635p' freecad-source/src/WebAssembly/FreeCADCoreProbe/DraftRuntimeProbe.cpp" |
| 6 | source/read | 0.218 | 0.000 | 0 | /bin/bash -lc "sed -n '330,475p' freecad-source/src/Mod/Draft/draftguitools/gui_groups.py" |
| 7 | source/read | 0.216 | 0.000 | 0 | /bin/bash -lc "sed -n '740,825p' web/src/workbench-shell.tsx" |
| 8 | source/read | 0.214 | 0.000 | 0 | /bin/bash -lc "rg -n 'autogroup\|autoGroup\|AutoGroup\|construction\|Construction' freecad-source/src/WebAssembly/FreeCADCoreProbe/DraftRuntimeProbe.cpp freecad-source/src/Mod/Draft/draftutils/groups.py freecad-source/src/Mod/Draft/DraftGui.py" |
| 9 | source/read | 9.158 | 0.001 | 0 | /bin/bash -lc "sed -n '1,230p' freecad-source/src/Mod/Draft/draftutils/groups.py" |
| 10 | source/read | 0.216 | 0.001 | 0 | /bin/bash -lc "sed -n '1,160p' docs/current/module-implementation-packet.json" |
| 11 | other | 3.526 | 0.001 | 0 | /bin/bash -lc "awk '/def setAutoGroup\\(/,/"'^    def / { if (seen++ == 0 \|\| $0 !~ /''^    def /) print; else exit }'"' freecad-source/src/Mod/Draft/DraftGui.py" |
| 12 | other | 0.216 | 0.000 | 0 | /bin/bash -lc "awk '/def autogroup\\(/,/"'^def / { if (seen++ == 0 \|\| $0 !~ /''^def /) print; else exit }'"' freecad-source/src/Mod/Draft/draftutils/groups.py" |
| 13 | other | 16.124 | 0.001 | 0 | /bin/bash -lc "awk '/"'^    def setAutoGroup'"\\(/ {p=1; print; next} p && /"'^    def / {exit} p {print}'"' freecad-source/src/Mod/Draft/DraftGui.py" |
| 14 | source/read | 0.215 | 0.000 | 0 | /bin/bash -lc "sed -n '360,390p' web/src/workbench-shell.tsx" |
| 15 | source/read | 0.040 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- web/src/draft-desktop-adapter.ts web/src/workbench-shell.tsx freecad-source/src/WebAssembly/FreeCADCoreProbe/DraftRuntimeProbe.cpp' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.154 | scheduler.cycle.started | thread.started |
| 0.181 | 9.972 | turn.started | agent_message |
| 10.153 | 2.342 | item.completed | command_execution |
| 12.496 | 0.216 | command:source/read | command_execution |
| 12.712 | 0.215 | command:source/read | command_execution |
| 12.929 | 0.216 | command:source/read | command_execution |
| 13.146 | 12.649 | command:source/read | command_execution |
| 25.797 | 0.218 | command:source/read | command_execution |
| 26.015 | 0.216 | command:source/read | command_execution |
| 26.232 | 0.214 | command:source/read | command_execution |
| 26.447 | 9.158 | command:source/read | command_execution |
| 35.606 | 0.216 | command:source/read | command_execution |
| 35.823 | 9.861 | command:source/read | agent_message |
| 45.684 | 3.526 | item.completed | command_execution |
| 49.211 | 0.216 | command:other | command_execution |
| 49.428 | 16.124 | command:other | command_execution |
| 65.554 | 0.215 | command:other | command_execution |
| 65.769 | 13.975 | command:source/read | agent_message |
| 79.744 | 39.371 | item.completed | file_change |
| 119.162 | 16.249 | command:source/read | file_change |
| 135.411 | 8.435 | item.completed | agent_message |
| 143.847 | 1.322 | item.completed | turn.completed |
| 145.169 | 1.007 | turn.completed | scheduler.cycle.completed |

## Cycle 7766

Task: FW-P6-FPA-Y; batch: {'id': 'ef695c99f86c9ed83f3e44f7', 'module': 'PartDesign', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
Observed command time (union): 0.013 s; between-event time: 98.142 s; file changes: 2.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.821 |
| batchPreflight | 0.048 |
| implementationPacket | 0.568 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/acceptance-contract-preflight | 0.001 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 2.226 | 0.002 | 0 | /bin/bash -lc "sed -n '1,200p' web/src/partdesign-desktop-adapter.ts" |
| 2 | source/read | 0.217 | 0.001 | 0 | /bin/bash -lc 'cat docs/UNATTENDED_WORKFLOW.md docs/OCCT_GEOMETRY_BOUNDARY.md' |
| 3 | source/read | 0.217 | 0.001 | 0 | /bin/bash -lc "rg -n 'setFeature\|Hole\|Draft\|LinearPattern\|Mirrored\|snapshot' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignRuntimeProbe.cpp freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignDesktopCommands.cpp" |
| 4 | source/read | 10.249 | 0.001 | 0 | /bin/bash -lc "sed -n '1,100p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignDesktopCommands.cpp " |
| 5 | source/read | 0.218 | 0.000 | 0 | /bin/bash -lc "rg -n 'document\|include' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesignRuntimeProbe.cpp" |
| 6 | source/read | 0.216 | 0.000 | 0 | /bin/bash -lc "sed -n '2226,2335p' freecad-source/src/Mod/PartDesign/Gui/Command.cpp" |
| 7 | source/read | 0.217 | 0.000 | 0 | /bin/bash -lc "sed -n '1,100p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
| 8 | source/read | 0.033 | 0.001 | 0 | /bin/bash -lc "sed -n '300,385p' tools/partdesign-business-cases.mjs" |
| 9 | other | 0.061 | 0.001 | 0 | /bin/bash -lc 'node --check tools/partdesign-business-cases.mjs' |
| 10 | source/read | 0.217 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- web/src/partdesign-desktop-adapter.ts tools/partdesign-business-cases.mjs docs/business-acceptance/PartDesign.json' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.172 | scheduler.cycle.started | thread.started |
| 0.200 | 10.482 | turn.started | agent_message |
| 10.682 | 2.226 | item.completed | command_execution |
| 12.912 | 0.217 | command:source/read | command_execution |
| 13.130 | 0.217 | command:source/read | command_execution |
| 13.347 | 10.249 | command:source/read | command_execution |
| 23.597 | 0.218 | command:source/read | command_execution |
| 23.816 | 0.216 | command:source/read | command_execution |
| 24.033 | 0.217 | command:source/read | command_execution |
| 24.251 | 11.316 | command:source/read | agent_message |
| 35.567 | 9.489 | item.completed | file_change |
| 45.092 | 13.256 | command:source/read | agent_message |
| 58.348 | 24.284 | item.completed | file_change |
| 82.633 | 0.061 | item.completed | command_execution |
| 82.695 | 0.217 | command:other | command_execution |
| 82.914 | 11.889 | command:source/read | agent_message |
| 94.803 | 2.174 | item.completed | turn.completed |
| 96.977 | 1.179 | turn.completed | scheduler.cycle.completed |