#!/usr/bin/env bash
set -euo pipefail

cd "$(dirname "$0")"

# LinuxCNC source basis: these project source sets are thin bridge/adaptor
# objects used by LinuxCNC-backed native probes. They wrap canon.hh,
# rs274ngc_pre.cc, tooldata.hh, and src/emc/kinematics sources instead of
# providing independent G-code or kinematics behavior.
if [[ "$#" -lt 1 || "$#" -gt 2 ]]; then
    echo "usage: $0 <source-set> [filter]" >&2
    exit 1
fi

source_set=$1
filter=${2:-}

case "$source_set" in
    linuxcnc-rs274-dump)
        sources=(
            core/src/canon_event_sink.cpp
            core/src/linuxcnc_canon_bridge.cpp
            core/src/linuxcnc_tooldata_fixture.cpp
            core/src/linuxcnc_5axiskins_adapter.c
            core/src/linuxcnc_5axiskins_adapter.cpp
            core/src/linuxcnc_corexykins_adapter.c
            core/src/linuxcnc_corexykins_adapter.cpp
            core/src/linuxcnc_cubic_adapter.c
            core/src/linuxcnc_cubic_adapter.cpp
            core/src/linuxcnc_genserfuncs_adapter.c
            core/src/linuxcnc_genserfuncs_adapter.cpp
            core/src/linuxcnc_genhexkins_adapter.c
            core/src/linuxcnc_genhexkins_adapter.cpp
            core/src/linuxcnc_kins_util_adapter.c
            core/src/linuxcnc_kins_util_adapter.cpp
            core/src/linuxcnc_lineardeltakins_adapter.c
            core/src/linuxcnc_lineardeltakins_adapter.cpp
            core/src/linuxcnc_maxkins_adapter.c
            core/src/linuxcnc_maxkins_adapter.cpp
            core/src/linuxcnc_pentakins_adapter.c
            core/src/linuxcnc_pentakins_adapter.cpp
            core/src/linuxcnc_pumakins_adapter.c
            core/src/linuxcnc_pumakins_adapter.cpp
            core/src/linuxcnc_rotatekins_adapter.c
            core/src/linuxcnc_rotatekins_adapter.cpp
            core/src/linuxcnc_rosekins_adapter.c
            core/src/linuxcnc_rosekins_adapter.cpp
            core/src/linuxcnc_rotarydeltakins_adapter.c
            core/src/linuxcnc_rotarydeltakins_adapter.cpp
            core/src/linuxcnc_scarakins_adapter.c
            core/src/linuxcnc_scarakins_adapter.cpp
            core/src/linuxcnc_scorbot_kins_adapter.c
            core/src/linuxcnc_scorbot_kins_adapter.cpp
            core/src/linuxcnc_tripodkins_adapter.c
            core/src/linuxcnc_tripodkins_adapter.cpp
            core/src/linuxcnc_trtfuncs_adapter.c
            core/src/linuxcnc_trtfuncs_adapter.cpp
            core/src/linuxcnc_userkfuncs_adapter.c
            core/src/linuxcnc_userkfuncs_adapter.cpp
            core/src/linuxcnc_xyzab_tdr_kins_adapter.c
            core/src/linuxcnc_xyzab_tdr_kins_adapter.cpp
            core/src/rtcp_kinematics.cpp
            core/src/simulator_gcode_controls.cpp
            core/tools/linuxcnc_rs274_dump.cpp
        )
        missing_source_message="missing LinuxCNC rs274 dump project source"
        missing_filter_message="missing LinuxCNC rs274 dump project source in list"
        ;;
    linuxcnc-bridge-smoke)
        sources=(
            core/src/canon_event_sink.cpp
            core/src/linuxcnc_canon_bridge.cpp
            core/src/linuxcnc_5axiskins_adapter.c
            core/src/linuxcnc_5axiskins_adapter.cpp
            core/src/linuxcnc_corexykins_adapter.c
            core/src/linuxcnc_corexykins_adapter.cpp
            core/src/linuxcnc_cubic_adapter.c
            core/src/linuxcnc_cubic_adapter.cpp
            core/src/linuxcnc_genserfuncs_adapter.c
            core/src/linuxcnc_genserfuncs_adapter.cpp
            core/src/linuxcnc_genhexkins_adapter.c
            core/src/linuxcnc_genhexkins_adapter.cpp
            core/src/linuxcnc_kins_util_adapter.c
            core/src/linuxcnc_kins_util_adapter.cpp
            core/src/linuxcnc_lineardeltakins_adapter.c
            core/src/linuxcnc_lineardeltakins_adapter.cpp
            core/src/linuxcnc_maxkins_adapter.c
            core/src/linuxcnc_maxkins_adapter.cpp
            core/src/linuxcnc_pentakins_adapter.c
            core/src/linuxcnc_pentakins_adapter.cpp
            core/src/linuxcnc_pumakins_adapter.c
            core/src/linuxcnc_pumakins_adapter.cpp
            core/src/linuxcnc_rotatekins_adapter.c
            core/src/linuxcnc_rotatekins_adapter.cpp
            core/src/linuxcnc_rosekins_adapter.c
            core/src/linuxcnc_rosekins_adapter.cpp
            core/src/linuxcnc_rotarydeltakins_adapter.c
            core/src/linuxcnc_rotarydeltakins_adapter.cpp
            core/src/linuxcnc_scarakins_adapter.c
            core/src/linuxcnc_scarakins_adapter.cpp
            core/src/linuxcnc_scorbot_kins_adapter.c
            core/src/linuxcnc_scorbot_kins_adapter.cpp
            core/src/linuxcnc_tripodkins_adapter.c
            core/src/linuxcnc_tripodkins_adapter.cpp
            core/src/linuxcnc_trtfuncs_adapter.c
            core/src/linuxcnc_trtfuncs_adapter.cpp
            core/src/linuxcnc_userkfuncs_adapter.c
            core/src/linuxcnc_userkfuncs_adapter.cpp
            core/src/linuxcnc_xyzab_tdr_kins_adapter.c
            core/src/linuxcnc_xyzab_tdr_kins_adapter.cpp
            core/src/rtcp_kinematics.cpp
        )
        missing_source_message="missing LinuxCNC bridge smoke project source"
        missing_filter_message="missing LinuxCNC bridge smoke project source in list"
        ;;
    *)
        echo "unknown project source set: $source_set" >&2
        exit 1
        ;;
esac

printf '%s\n' "${sources[@]}" | ./list-filtered-existing-paths.sh \
    --project-relative \
    "$filter" \
    "$missing_source_message" \
    "$missing_filter_message"