参考所有分组：补 G73 G85 G86 G89 source 覆盖，测试通过

docs/linuxcnc-porting.md

@@ -220,5 +220,5 @@ This matrix tracks LinuxCNC feature coverage for the web/WASM simulator. A featu
 | Word reader validation | LinuxCNC native/source reader errors covered for negative `F/G/H/L/M/S/T` values and repeated `A/B/C/D/E/F/H/I/J/K/L/P/Q/R/S/T/U/V/W/X/Y/Z` words from `interp_read.cc` | `tests/gcode/linuxcnc_negative_f_word_error.ngc`, `tests/gcode/linuxcnc_negative_g_code_error.ngc`, `tests/gcode/linuxcnc_negative_h_word_error.ngc`, `tests/gcode/linuxcnc_negative_l_word_error.ngc`, `tests/gcode/linuxcnc_negative_m_code_error.ngc`, `tests/gcode/linuxcnc_negative_s_word_error.ngc`, `tests/gcode/linuxcnc_negative_t_word_error.ngc`, `tests/gcode/linuxcnc_multiple_a_words_error.ngc`, `tests/gcode/linuxcnc_multiple_b_words_error.ngc`, `tests/gcode/linuxcnc_multiple_c_words_error.ngc`, `tests/gcode/linuxcnc_multiple_d_words_error.ngc`, `tests/gcode/linuxcnc_multiple_e_words_error.ngc`, `tests/gcode/linuxcnc_multiple_f_words_error.ngc`, `tests/gcode/linuxcnc_multiple_h_words_error.ngc`, `tests/gcode/linuxcnc_multiple_i_words_error.ngc`, `tests/gcode/linuxcnc_multiple_j_words_error.ngc`, `tests/gcode/linuxcnc_multiple_k_words_error.ngc`, `tests/gcode/linuxcnc_multiple_l_words_error.ngc`, `tests/gcode/linuxcnc_multiple_p_words_error.ngc`, `tests/gcode/linuxcnc_multiple_q_words_error.ngc`, `tests/gcode/linuxcnc_multiple_r_words_error.ngc`, `tests/gcode/linuxcnc_multiple_s_words_error.ngc`, `tests/gcode/linuxcnc_multiple_t_words_error.ngc`, `tests/gcode/linuxcnc_multiple_u_words_error.ngc`, `tests/gcode/linuxcnc_multiple_v_words_error.ngc`, `tests/gcode/linuxcnc_multiple_w_words_error.ngc`, `tests/gcode/linuxcnc_multiple_x_words_error.ngc`, `tests/gcode/linuxcnc_multiple_y_words_error.ngc`, `tests/gcode/linuxcnc_multiple_z_words_error.ngc` |
 | G/M reader validation | LinuxCNC native/source `read_g()`/`read_m()` errors covered for range checks, unknown code tables, and same-modal-group conflicts from `interp_read.cc` and `interp_array.cc` | `tests/gcode/linuxcnc_g_code_out_of_range_error.ngc`, `tests/gcode/linuxcnc_unknown_g_code_error.ngc`, `tests/gcode/linuxcnc_two_g_codes_same_modal_group_error.ngc`, `tests/gcode/linuxcnc_m_code_greater_199_error.ngc`, `tests/gcode/linuxcnc_unknown_m_code_error.ngc`, `tests/gcode/linuxcnc_two_m_codes_same_modal_group_error.ngc` |
 | Block/item reader validation | LinuxCNC native/source errors covered for repeated `$`, block-delete execution skipping, unused `D/$/E/H/I/J/K/L/P/Q/R` words, bad item-start characters, middle-of-line or comment-prefixed `N` words, comment-prefixed or midline `O` words, top-level or midline bracket items, naked top-level numbers, non-leading ATAN argument slashes, malformed leading `N` numbers, EOF/program-end file checks, overlong file lines, and too many M-codes from `interp_read.cc`, `interp_array.cc`, and `interp_check.cc` | `tests/gcode/linuxcnc_block_delete.ngc`, `tests/gcode/linuxcnc_multiple_spindle_choice_words_error.ngc`, `tests/gcode/linuxcnc_d_word_no_use_error.ngc`, `tests/gcode/linuxcnc_spindle_dollar_no_use_error.ngc`, `tests/gcode/linuxcnc_e_word_no_use_error.ngc`, `tests/gcode/linuxcnc_h_word_no_use_error.ngc`, `tests/gcode/linuxcnc_i_word_no_use_error.ngc`, `tests/gcode/linuxcnc_j_word_no_use_error.ngc`, `tests/gcode/linuxcnc_k_word_no_use_error.ngc`, `tests/gcode/linuxcnc_l_word_no_use_error.ngc`, `tests/gcode/linuxcnc_p_word_no_use_error.ngc`, `tests/gcode/linuxcnc_q_word_no_use_error.ngc`, `tests/gcode/linuxcnc_r_word_no_use_error.ngc`, `tests/gcode/linuxcnc_bad_character_bang_error.ngc`, `tests/gcode/linuxcnc_bad_character_middle_n_word_error.ngc`, `tests/gcode/linuxcnc_comment_prefixed_n_word_error.ngc`, `tests/gcode/linuxcnc_comment_prefixed_spaced_n_word_error.ngc`, `tests/gcode/linuxcnc_comment_prefixed_oword_error.ngc`, `tests/gcode/linuxcnc_midline_numeric_oword_error.ngc`, `tests/gcode/linuxcnc_midline_named_oword_error.ngc`, `tests/gcode/linuxcnc_bad_character_top_left_bracket_error.ngc`, `tests/gcode/linuxcnc_bad_character_top_right_bracket_error.ngc`, `tests/gcode/linuxcnc_bad_character_midline_left_bracket_error.ngc`, `tests/gcode/linuxcnc_bad_character_midline_right_bracket_error.ngc`, `tests/gcode/linuxcnc_bad_character_top_number_error.ngc`, `tests/gcode/linuxcnc_top_level_bare_atan_error.ngc`, `tests/gcode/linuxcnc_midline_bare_atan_error.ngc`, `tests/gcode/linuxcnc_bad_n_number_format_error.ngc`, `tests/gcode/linuxcnc_file_ended_no_program_end_error.ngc`, `tests/gcode/linuxcnc_file_ended_no_percent_error.ngc`, generated `linuxcnc_command_too_long_error.ngc`, `tests/gcode/linuxcnc_too_many_m_codes_error.ngc` |
-| Broader canned cycles `G73`, `G74`, `G82`-`G89` | partially covered: `G73`, `G74`, `G82`, `G83`, `G84`, `G85`, `G86`, `G87`, `G88`, `G89`; smoke parser maps supported cycles across `G17/G18/G19`, including LinuxCNC's special non-XY `G74/G84` tapping argument order and `G87` plane-specific `I/J/K` mapping; native/source regressions now check non-XY `G74/G84/G86/G87/G88` sequences | `tests/gcode/linuxcnc_canned_cycles_extended.ngc`, `tests/gcode/linuxcnc_canned_cycle_planes.ngc`, smoke API regression |
+| Broader canned cycles `G73`, `G74`, `G82`-`G89` | covered for representative LinuxCNC native/source `G73`, `G74`, `G82`, `G83`, `G84`, `G85`, `G86`, `G87`, `G88`, and `G89` sequences from `interp_cycles.cc`, including peck drilling, feed-out boring, stop/restart boring, dwell/feed-out boring, special non-XY `G74/G84` tapping argument order, and `G87` plane-specific `I/J/K` mapping; smoke parser still maps supported cycles across `G17/G18/G19` | `tests/gcode/linuxcnc_canned_cycles_extended.ngc`, `tests/gcode/linuxcnc_canned_cycle_planes.ngc`, smoke API regression |
 | Full source-level wasm build | covered for the current wasm-safe RS274 source set, with remaining work focused on broadening browser-hostile dependency replacement and feature coverage | `./build-wasm.sh`, `test-linuxcnc-wasm-runtime-link.sh`, `test-web-wasm-node-smoke.sh`, `test-web-wasm-browser-smoke.sh` |