diff --git a/docs/linuxcnc-porting.md b/docs/linuxcnc-porting.md index 00ca806..912e9c9 100644 --- a/docs/linuxcnc-porting.md +++ b/docs/linuxcnc-porting.md @@ -214,7 +214,7 @@ This matrix tracks LinuxCNC feature coverage for the web/WASM simulator. A featu | Cutter compensation | covered for tool-table `G41/G42 D...` and explicit-radius `G41.1/G42.1/G40` through LinuxCNC native/source backends | `tests/gcode/linuxcnc_cutter_comp.ngc` | | Probe moves `G38.2/G38.3/G38.4/G38.5` | covered as distinct probe events with LinuxCNC `probe_type` preserved through smoke, native, and source-linked paths | `tests/gcode/linuxcnc_probe_no_error.ngc` | | O-word and Fanuc subroutines, calls, and control flow | covered for numeric and named `O... sub/call/return/endsub`, Fanuc-style `M98 P... L...`/`M99`, plus `if`/`elseif`/`else`, `while`, `repeat`, `do`/`while`, `break`, and `continue` through LinuxCNC file mode; source-linked read/execution errors cover malformed O-word commands, missing control-expression brackets, duplicate/undefined/unmatched labels, out-of-context `return`/`endsub`, wrong subroutine close style, too many or empty call parameters, too many nested call levels, Fanuc-style `M98` missing `P`, and midline/comment-prefixed `M98` falling through to normal M-code handling; smoke parser also covers named `O` sub/call/return/endsub and loop-control forms | `tests/gcode/smoke_oword_subprogram.ngc`, `tests/gcode/linuxcnc_named_oword_subprogram.ngc`, `tests/gcode/smoke_subprogram_m98.ngc`, `tests/gcode/linuxcnc_oword_control_flow.ngc`, `tests/gcode/linuxcnc_oword_unknown_command_error.ngc`, `tests/gcode/linuxcnc_oword_unexpected_trailing_item_error.ngc`, `tests/gcode/linuxcnc_oword_if_missing_bracket_error.ngc`, `tests/gcode/linuxcnc_oword_elseif_missing_bracket_error.ngc`, `tests/gcode/linuxcnc_oword_while_missing_bracket_error.ngc`, `tests/gcode/linuxcnc_oword_repeat_missing_bracket_error.ngc`, `tests/gcode/linuxcnc_oword_too_many_call_parameters_error.ngc`, `tests/gcode/linuxcnc_oword_empty_call_parameter_error.ngc`, `tests/gcode/linuxcnc_oword_too_many_call_levels_error.ngc`, `tests/gcode/linuxcnc_oword_endsub_without_sub_error.ngc`, `tests/gcode/linuxcnc_oword_return_without_sub_error.ngc`, `tests/gcode/linuxcnc_oword_duplicate_if_label_error.ngc`, `tests/gcode/linuxcnc_oword_elseif_undefined_label_error.ngc`, `tests/gcode/linuxcnc_oword_else_undefined_label_error.ngc`, `tests/gcode/linuxcnc_oword_endif_undefined_label_error.ngc`, `tests/gcode/linuxcnc_oword_break_undefined_label_error.ngc`, `tests/gcode/linuxcnc_oword_continue_undefined_label_error.ngc`, `tests/gcode/linuxcnc_oword_endwhile_undefined_label_error.ngc`, `tests/gcode/linuxcnc_oword_elseif_no_matching_if_error.ngc`, `tests/gcode/linuxcnc_oword_break_no_matching_loop_error.ngc`, `tests/gcode/linuxcnc_oword_continue_no_matching_loop_error.ngc`, `tests/gcode/linuxcnc_oword_endrepeat_no_matching_repeat_error.ngc`, `tests/gcode/linuxcnc_oword_endif_no_matching_if_error.ngc`, `tests/gcode/linuxcnc_oword_endwhile_no_matching_while_error.ngc`, `tests/gcode/linuxcnc_oword_fanuc_requires_m99_error.ngc`, `tests/gcode/linuxcnc_oword_sub_requires_endsub_error.ngc`, `tests/gcode/linuxcnc_m98_missing_p_word_error.ngc`, `tests/gcode/linuxcnc_midline_m98_error.ngc`, `tests/gcode/linuxcnc_comment_prefixed_m98_error.ngc` | -| Parameter expressions and operators | covered for parameter references, source-linked `mod`, `**`, logical, and relational operator precedence, plus LinuxCNC parameter-setting syntax, parameter index validation, named-parameter termination, real-number parsing, divide-by-zero, negative sqrt/power, infinity rejection, malformed and bare `ATAN[]/[]`, unary operation syntax including bare unary items, `read_operation_unary()` unknown-word branches, `read_operation()` binary-operation prefix, unknown operation, and unclosed-expression error paths from `interp_read.cc`/`interp_execute.cc` | `tests/gcode/linuxcnc_parameter_expression_assignment.ngc`, `tests/gcode/linuxcnc_parameter_missing_equal_error.ngc`, `tests/gcode/linuxcnc_midline_parameter_missing_equal_error.ngc`, `tests/gcode/linuxcnc_parameter_missing_value_error.ngc`, `tests/gcode/linuxcnc_parameter_number_out_of_range_error.ngc`, `tests/gcode/linuxcnc_parameter_reference_out_of_range_error.ngc`, `tests/gcode/linuxcnc_non_integer_parameter_index_error.ngc`, `tests/gcode/linuxcnc_named_parameter_not_terminated_error.ngc`, `tests/gcode/linuxcnc_no_real_value_error.ngc`, `tests/gcode/linuxcnc_bad_number_format_error.ngc`, `tests/gcode/linuxcnc_expression_operators.ngc`, `tests/gcode/linuxcnc_negative_sqrt_error.ngc`, `tests/gcode/linuxcnc_divide_by_zero_error.ngc`, `tests/gcode/linuxcnc_negative_power_error.ngc`, `tests/gcode/linuxcnc_infinite_expression_error.ngc`, `tests/gcode/linuxcnc_atan_missing_slash_error.ngc`, `tests/gcode/linuxcnc_atan_missing_bracket_error.ngc`, `tests/gcode/linuxcnc_top_level_bare_atan_error.ngc`, `tests/gcode/linuxcnc_midline_bare_atan_error.ngc`, `tests/gcode/linuxcnc_unary_missing_bracket_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_c_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_e_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_f_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_l_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_r_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_s_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_t_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_default_word_error.ngc`, `tests/gcode/linuxcnc_top_level_bare_unary_error.ngc`, `tests/gcode/linuxcnc_midline_bare_unary_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_a_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_e_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_g_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_l_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_m_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_n_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_o_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_x_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_operation_error.ngc`, `tests/gcode/linuxcnc_unclosed_expression_error.ngc` | +| Parameter expressions and operators | covered for parameter references, native/source `mod`, `**`, logical, and relational operator precedence, plus LinuxCNC parameter-setting syntax, parameter index validation, named-parameter termination, real-number parsing, divide-by-zero, negative sqrt/power, infinity rejection, malformed and bare `ATAN[]/[]`, unary operation syntax including bare unary items, `read_operation_unary()` unknown-word branches, `read_operation()` binary-operation prefix, unknown operation, and unclosed-expression error paths from `interp_read.cc`/`interp_execute.cc` | `tests/gcode/linuxcnc_parameter_expression_assignment.ngc`, `tests/gcode/linuxcnc_parameter_missing_equal_error.ngc`, `tests/gcode/linuxcnc_midline_parameter_missing_equal_error.ngc`, `tests/gcode/linuxcnc_parameter_missing_value_error.ngc`, `tests/gcode/linuxcnc_parameter_number_out_of_range_error.ngc`, `tests/gcode/linuxcnc_parameter_reference_out_of_range_error.ngc`, `tests/gcode/linuxcnc_non_integer_parameter_index_error.ngc`, `tests/gcode/linuxcnc_named_parameter_not_terminated_error.ngc`, `tests/gcode/linuxcnc_no_real_value_error.ngc`, `tests/gcode/linuxcnc_bad_number_format_error.ngc`, `tests/gcode/linuxcnc_expression_operators.ngc`, `tests/gcode/linuxcnc_negative_sqrt_error.ngc`, `tests/gcode/linuxcnc_divide_by_zero_error.ngc`, `tests/gcode/linuxcnc_negative_power_error.ngc`, `tests/gcode/linuxcnc_infinite_expression_error.ngc`, `tests/gcode/linuxcnc_atan_missing_slash_error.ngc`, `tests/gcode/linuxcnc_atan_missing_bracket_error.ngc`, `tests/gcode/linuxcnc_top_level_bare_atan_error.ngc`, `tests/gcode/linuxcnc_midline_bare_atan_error.ngc`, `tests/gcode/linuxcnc_unary_missing_bracket_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_c_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_e_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_f_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_l_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_r_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_s_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_t_word_error.ngc`, `tests/gcode/linuxcnc_unary_unknown_default_word_error.ngc`, `tests/gcode/linuxcnc_top_level_bare_unary_error.ngc`, `tests/gcode/linuxcnc_midline_bare_unary_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_a_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_e_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_g_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_l_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_m_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_n_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_o_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_x_operation_error.ngc`, `tests/gcode/linuxcnc_binary_unknown_operation_error.ngc`, `tests/gcode/linuxcnc_unclosed_expression_error.ngc` | | Word reader validation | LinuxCNC native/source reader errors covered for negative `F/G/H/L/M/S/T` values and repeated `A/B/C/D/E/F/H/I/J/K/L/P/Q/R/S/T/U/V/W/X/Y/Z` words from `interp_read.cc` | `tests/gcode/linuxcnc_negative_f_word_error.ngc`, `tests/gcode/linuxcnc_negative_g_code_error.ngc`, `tests/gcode/linuxcnc_negative_h_word_error.ngc`, `tests/gcode/linuxcnc_negative_l_word_error.ngc`, `tests/gcode/linuxcnc_negative_m_code_error.ngc`, `tests/gcode/linuxcnc_negative_s_word_error.ngc`, `tests/gcode/linuxcnc_negative_t_word_error.ngc`, `tests/gcode/linuxcnc_multiple_a_words_error.ngc`, `tests/gcode/linuxcnc_multiple_b_words_error.ngc`, `tests/gcode/linuxcnc_multiple_c_words_error.ngc`, `tests/gcode/linuxcnc_multiple_d_words_error.ngc`, `tests/gcode/linuxcnc_multiple_e_words_error.ngc`, `tests/gcode/linuxcnc_multiple_f_words_error.ngc`, `tests/gcode/linuxcnc_multiple_h_words_error.ngc`, `tests/gcode/linuxcnc_multiple_i_words_error.ngc`, `tests/gcode/linuxcnc_multiple_j_words_error.ngc`, `tests/gcode/linuxcnc_multiple_k_words_error.ngc`, `tests/gcode/linuxcnc_multiple_l_words_error.ngc`, `tests/gcode/linuxcnc_multiple_p_words_error.ngc`, `tests/gcode/linuxcnc_multiple_q_words_error.ngc`, `tests/gcode/linuxcnc_multiple_r_words_error.ngc`, `tests/gcode/linuxcnc_multiple_s_words_error.ngc`, `tests/gcode/linuxcnc_multiple_t_words_error.ngc`, `tests/gcode/linuxcnc_multiple_u_words_error.ngc`, `tests/gcode/linuxcnc_multiple_v_words_error.ngc`, `tests/gcode/linuxcnc_multiple_w_words_error.ngc`, `tests/gcode/linuxcnc_multiple_x_words_error.ngc`, `tests/gcode/linuxcnc_multiple_y_words_error.ngc`, `tests/gcode/linuxcnc_multiple_z_words_error.ngc` | | G/M reader validation | LinuxCNC native/source `read_g()`/`read_m()` errors covered for range checks, unknown code tables, and same-modal-group conflicts from `interp_read.cc` and `interp_array.cc` | `tests/gcode/linuxcnc_g_code_out_of_range_error.ngc`, `tests/gcode/linuxcnc_unknown_g_code_error.ngc`, `tests/gcode/linuxcnc_two_g_codes_same_modal_group_error.ngc`, `tests/gcode/linuxcnc_m_code_greater_199_error.ngc`, `tests/gcode/linuxcnc_unknown_m_code_error.ngc`, `tests/gcode/linuxcnc_two_m_codes_same_modal_group_error.ngc` | | Block/item reader validation | LinuxCNC native/source errors covered for repeated `$` and unused `D/$/E/H/I/J/K/L/P/Q/R` words; source-linked coverage also checks bad item-start characters, middle-of-line or comment-prefixed `N` words, comment-prefixed or midline `O` words, top-level or midline bracket items, naked top-level numbers, malformed leading `N` numbers, EOF/program-end file checks, overlong file lines, and too many M-codes from `interp_read.cc`, `interp_array.cc`, and `interp_check.cc` | `tests/gcode/linuxcnc_multiple_spindle_choice_words_error.ngc`, `tests/gcode/linuxcnc_d_word_no_use_error.ngc`, `tests/gcode/linuxcnc_spindle_dollar_no_use_error.ngc`, `tests/gcode/linuxcnc_e_word_no_use_error.ngc`, `tests/gcode/linuxcnc_h_word_no_use_error.ngc`, `tests/gcode/linuxcnc_i_word_no_use_error.ngc`, `tests/gcode/linuxcnc_j_word_no_use_error.ngc`, `tests/gcode/linuxcnc_k_word_no_use_error.ngc`, `tests/gcode/linuxcnc_l_word_no_use_error.ngc`, `tests/gcode/linuxcnc_p_word_no_use_error.ngc`, `tests/gcode/linuxcnc_q_word_no_use_error.ngc`, `tests/gcode/linuxcnc_r_word_no_use_error.ngc`, `tests/gcode/linuxcnc_bad_character_bang_error.ngc`, `tests/gcode/linuxcnc_bad_character_middle_n_word_error.ngc`, `tests/gcode/linuxcnc_comment_prefixed_n_word_error.ngc`, `tests/gcode/linuxcnc_comment_prefixed_spaced_n_word_error.ngc`, `tests/gcode/linuxcnc_comment_prefixed_oword_error.ngc`, `tests/gcode/linuxcnc_midline_numeric_oword_error.ngc`, `tests/gcode/linuxcnc_midline_named_oword_error.ngc`, `tests/gcode/linuxcnc_bad_character_top_left_bracket_error.ngc`, `tests/gcode/linuxcnc_bad_character_top_right_bracket_error.ngc`, `tests/gcode/linuxcnc_bad_character_midline_left_bracket_error.ngc`, `tests/gcode/linuxcnc_bad_character_midline_right_bracket_error.ngc`, `tests/gcode/linuxcnc_bad_character_top_number_error.ngc`, `tests/gcode/linuxcnc_bad_n_number_format_error.ngc`, `tests/gcode/linuxcnc_file_ended_no_program_end_error.ngc`, `tests/gcode/linuxcnc_file_ended_no_percent_error.ngc`, generated `linuxcnc_command_too_long_error.ngc`, `tests/gcode/linuxcnc_too_many_m_codes_error.ngc` | diff --git a/test-linuxcnc-rs274-native.sh b/test-linuxcnc-rs274-native.sh index bb52465..f602441 100755 --- a/test-linuxcnc-rs274-native.sh +++ b/test-linuxcnc-rs274-native.sh @@ -543,6 +543,125 @@ INI_FILE_NAME="$ini_named_parameter_file" CNC_SIM_RS274_FILE_MODE=1 CNC_SIM_RS27 # Source basis: LinuxCNC src/emc/rs274ngc/interp_namedparams.cc lookup_named_param() # and init_readonly_param() expose modal/unit/feed/spindle readonly parameters. CNC_SIM_RS274_FILE_MODE=1 CNC_SIM_RS274_VAR="$var_file" "$build_dir/linuxcnc_rs274_dump" tests/gcode/linuxcnc_readonly_named_parameters.ngc >"$output_dir/cnc_sim_linuxcnc_readonly_named_parameters.json" +# Source basis: LinuxCNC src/emc/rs274ngc/interp_read.cc +# read_parameter_setting(), read_parameter(), read_real_value(), +# read_atan(), read_unary(), and read_operation() reject malformed +# parameter assignments, references, unary calls, and binary expressions. +CNC_SIM_RS274_FILE_MODE=1 CNC_SIM_RS274_VAR="$var_file" "$build_dir/linuxcnc_rs274_dump" tests/gcode/linuxcnc_parameter_expression_assignment.ngc >"$output_dir/cnc_sim_linuxcnc_parameter_expression_assignment.json" +CNC_SIM_RS274_FILE_MODE=1 CNC_SIM_RS274_VAR="$var_file" "$build_dir/linuxcnc_rs274_dump" tests/gcode/linuxcnc_expression_operators.ngc >"$output_dir/cnc_sim_linuxcnc_expression_operators.json" +if CNC_SIM_RS274_FILE_MODE=1 CNC_SIM_RS274_VAR="$var_file" \ + "$build_dir/linuxcnc_rs274_dump" tests/gcode/linuxcnc_readonly_named_parameter_assign_error.ngc \ + >"$output_dir/cnc_sim_linuxcnc_readonly_named_parameter_assign_error.json" 2>"$output_dir/cnc_sim_linuxcnc_readonly_named_parameter_assign_error.err"; then + echo "expected linuxcnc_readonly_named_parameter_assign_error.ngc to fail" >&2 + exit 1 +fi +grep -Fq "Cannot assign to read-only parameter #<_line>" \ + "$output_dir/cnc_sim_linuxcnc_readonly_named_parameter_assign_error.err" +parameter_setting_error_cases=( + "linuxcnc_parameter_missing_equal_error|Equal sign missing in parameter setting" + "linuxcnc_midline_parameter_missing_equal_error|Equal sign missing in parameter setting" + "linuxcnc_parameter_missing_value_error|No characters found in reading real value" +) +for case in "${parameter_setting_error_cases[@]}"; do + fixture=${case%%|*} + expected=${case#*|} + if CNC_SIM_RS274_FILE_MODE=1 CNC_SIM_RS274_VAR="$var_file" \ + "$build_dir/linuxcnc_rs274_dump" "tests/gcode/$fixture.ngc" \ + >"$output_dir/cnc_sim_linuxcnc_$fixture.json" 2>"$output_dir/cnc_sim_linuxcnc_$fixture.err"; then + echo "expected $fixture.ngc to fail" >&2 + exit 1 + fi + grep -Fq "$expected" "$output_dir/cnc_sim_linuxcnc_$fixture.err" +done +parameter_reader_error_cases=( + "linuxcnc_parameter_number_out_of_range_error|Parameter number out of range" + "linuxcnc_parameter_reference_out_of_range_error|Parameter number out of range" + "linuxcnc_non_integer_parameter_index_error|Non integer value for integer" + "linuxcnc_named_parameter_not_terminated_error|Named parameter not terminated" + "linuxcnc_no_real_value_error|No characters found in reading real value" + "linuxcnc_bad_number_format_error|bad number format (conversion failed) parsing '+'" +) +for case in "${parameter_reader_error_cases[@]}"; do + fixture=${case%%|*} + expected=${case#*|} + if CNC_SIM_RS274_FILE_MODE=1 CNC_SIM_RS274_VAR="$var_file" \ + "$build_dir/linuxcnc_rs274_dump" "tests/gcode/$fixture.ngc" \ + >"$output_dir/cnc_sim_linuxcnc_$fixture.json" 2>"$output_dir/cnc_sim_linuxcnc_$fixture.err"; then + echo "expected $fixture.ngc to fail" >&2 + exit 1 + fi + grep -Fq "$expected" "$output_dir/cnc_sim_linuxcnc_$fixture.err" +done +# Source basis: LinuxCNC src/emc/rs274ngc/interp_execute.cc +# execute_unary() and execute_binary1() reject invalid sqrt, divide, and +# power expression operators during read_real_expression(). +expression_execute_error_cases=( + "linuxcnc_negative_sqrt_error|Negative argument to sqrt" + "linuxcnc_infinite_expression_error|Calculation resulted in 'infinity'" + "linuxcnc_divide_by_zero_error|Attempt to divide by zero" + "linuxcnc_negative_power_error|Attempt to raise negative to non integer power" +) +for case in "${expression_execute_error_cases[@]}"; do + fixture=${case%%|*} + expected=${case#*|} + if CNC_SIM_RS274_FILE_MODE=1 CNC_SIM_RS274_VAR="$var_file" \ + "$build_dir/linuxcnc_rs274_dump" "tests/gcode/$fixture.ngc" \ + >"$output_dir/cnc_sim_linuxcnc_$fixture.json" 2>"$output_dir/cnc_sim_linuxcnc_$fixture.err"; then + echo "expected $fixture.ngc to fail" >&2 + exit 1 + fi + grep -Fq "$expected" "$output_dir/cnc_sim_linuxcnc_$fixture.err" +done +atan_unary_error_cases=( + "linuxcnc_atan_missing_slash_error|Slash missing after first atan argument" + "linuxcnc_atan_missing_bracket_error|Left bracket missing after slash with atan" + "linuxcnc_unary_missing_bracket_error|Left bracket missing after unary operation name" + "linuxcnc_unary_unknown_word_error|Unknown word starting with a" + "linuxcnc_unary_unknown_c_word_error|Unknown word starting with c" + "linuxcnc_unary_unknown_e_word_error|Unknown word starting with e" + "linuxcnc_unary_unknown_f_word_error|Unknown word starting with f" + "linuxcnc_unary_unknown_l_word_error|Unknown word starting with l" + "linuxcnc_unary_unknown_r_word_error|Unknown word starting with r" + "linuxcnc_unary_unknown_s_word_error|Unknown word starting with s" + "linuxcnc_unary_unknown_t_word_error|Unknown word starting with t" + "linuxcnc_unary_unknown_default_word_error|Unknown word where unary operation could be" + "linuxcnc_top_level_bare_unary_error|Unknown word where unary operation could be" + "linuxcnc_midline_bare_unary_error|Unknown word where unary operation could be" +) +for case in "${atan_unary_error_cases[@]}"; do + fixture=${case%%|*} + expected=${case#*|} + if CNC_SIM_RS274_FILE_MODE=1 CNC_SIM_RS274_VAR="$var_file" \ + "$build_dir/linuxcnc_rs274_dump" "tests/gcode/$fixture.ngc" \ + >"$output_dir/cnc_sim_linuxcnc_$fixture.json" 2>"$output_dir/cnc_sim_linuxcnc_$fixture.err"; then + echo "expected $fixture.ngc to fail" >&2 + exit 1 + fi + grep -Fq "$expected" "$output_dir/cnc_sim_linuxcnc_$fixture.err" +done +binary_operation_error_cases=( + "linuxcnc_binary_unknown_a_operation_error|Unknown operation name starting with a" + "linuxcnc_binary_unknown_e_operation_error|Unknown operation name starting with e" + "linuxcnc_binary_unknown_g_operation_error|Unknown operation name starting with g" + "linuxcnc_binary_unknown_l_operation_error|Unknown operation name starting with l" + "linuxcnc_binary_unknown_m_operation_error|Unknown operation name starting with m" + "linuxcnc_binary_unknown_n_operation_error|Unknown operation name starting with n" + "linuxcnc_binary_unknown_o_operation_error|Unknown operation name starting with o" + "linuxcnc_binary_unknown_x_operation_error|Unknown operation name starting with x" + "linuxcnc_binary_unknown_operation_error|Unknown operation" + "linuxcnc_unclosed_expression_error|Unclosed expression" +) +for case in "${binary_operation_error_cases[@]}"; do + fixture=${case%%|*} + expected=${case#*|} + if CNC_SIM_RS274_FILE_MODE=1 CNC_SIM_RS274_VAR="$var_file" \ + "$build_dir/linuxcnc_rs274_dump" "tests/gcode/$fixture.ngc" \ + >"$output_dir/cnc_sim_linuxcnc_$fixture.json" 2>"$output_dir/cnc_sim_linuxcnc_$fixture.err"; then + echo "expected $fixture.ngc to fail" >&2 + exit 1 + fi + grep -Fq "$expected" "$output_dir/cnc_sim_linuxcnc_$fixture.err" +done cp "$base_var_file" "$var_file" CNC_SIM_RS274_VAR="$var_file" "$build_dir/linuxcnc_rs274_dump" tests/gcode/linuxcnc_coordinate_offsets.ngc >"$output_dir/cnc_sim_linuxcnc_coordinate_offsets.json" cp "$base_var_file" "$var_file"