meswork/wasm-simulator
6
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

按源修正外部单位换算

Browse Source 
结论：依据 LinuxCNC emccanon.cc 与 units.h，GET_EXTERNAL_LENGTH_UNITS 返回 user-units-per-mm 而非当前程序单位；新增 G20/G21 后 G92.3 恢复覆盖，native/source-link/test-native 均通过。
This commit is contained in:
cnc
2026-06-06 08:26:21 +08:00
parent ccd51ff373
commit 25cb6885bf
4 changed files with 70 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

29
test-linuxcnc-source-link.sh
View File

@@ -1864,6 +1864,12 @@ CNC_SIM_RS274_FILE_MODE=1 CNC_SIM_RS274_VAR="$var_file" \
CNC_SIM_RS274_VAR="$var_file" \
"$build_dir/linuxcnc_rs274_source_dump" tests/gcode/linuxcnc_units_current_position.ngc \
>"$output_dir/cnc_sim_linuxcnc_source_units_current_position.json"
# Source basis: LinuxCNC src/emc/rs274ngc/interp_convert.cc convert_axis_offsets()
# stores G92 offsets through PROGRAM_TO_USER_LEN and restores them through
# USER_TO_PROGRAM_LEN after convert_length_units() changes active program units.
CNC_SIM_RS274_VAR="$var_file" \
"$build_dir/linuxcnc_rs274_source_dump" tests/gcode/linuxcnc_units_g92_restore.ngc \
>"$output_dir/cnc_sim_linuxcnc_source_units_g92_restore.json"
CNC_SIM_RS274_SOURCE_OUTPUT_DIR="$output_dir" python3 - <<'PY'
import json
@@ -1922,6 +1928,28 @@ if units_rapid[2]["start"] != units_rapid[2]["end"]:
if (units_rapid[1]["end"]["a"], units_rapid[1]["end"]["b"], units_rapid[1]["end"]["c"]) != (4, 5, 6):
raise SystemExit("source-linked LinuxCNC G21 unit change unexpectedly scaled rotary axes")
units_g92_restore = load("cnc_sim_linuxcnc_source_units_g92_restore.json")
units_g92_states = [
(
event["line"],
event["start"]["x"],
event["start"]["y"],
event["start"]["z"],
event["start"]["a"],
event["start"]["b"],
event["start"]["c"],
)
for event in units_g92_restore
if event["type"] == "set-g92-offset" and event["line"] > 0
]
expected_units_g92_states = [
(3, -1, -2, -3, -4, -5, -6),
(5, 0, 0, 0, 0, 0, 0),
(6, -25.4, -50.8, -76.2, -4, -5, -6),
]
if units_g92_states != expected_units_g92_states:
raise SystemExit(f"unexpected source-linked LinuxCNC G20/G21 G92 restore states: {units_g92_states!r}")
fractional_linenumbers = load("cnc_sim_linuxcnc_source_fractional_linenumbers.json")
fractional_spindle_states = [
(event["line"], event["spindle"])
@@ -4176,3 +4204,4 @@ echo "dumped $output_dir/cnc_sim_linuxcnc_source_extended_linenumbers.json"
echo "dumped $output_dir/cnc_sim_linuxcnc_source_close_and_downcase_words.json"
echo "dumped $output_dir/cnc_sim_linuxcnc_source_percent_file_ignores_trailing.json"
echo "dumped $output_dir/cnc_sim_linuxcnc_source_units_current_position.json"
echo "dumped $output_dir/cnc_sim_linuxcnc_source_units_g92_restore.json"