using System;
using System.Data;
using bizFacade;
using MesServerWork;

namespace MesServerFunctions
{
    partial class FunctionMES
    {
        /// <summary>
        /// 正常逻辑工作(传递机型)
        /// </summary>
        /// <param name="OpName"></param>
        /// <param name="EngineTypeID"></param>
        /// <param name="EngineType"></param>
        /// <param name="EngineID"></param>
        /// <param name="PartPallet_Code"></param>
        private void EngineTypeGetOver_PLC_Work(string OpName, int EngineTypeID, string EngineType, string EngineID, int PartPallet_Code, string OrderForm)
        {
            int IsAllowWork;
            int RepairPartStatusPLC = 0;
            int MES_QualityMask = 1;

            if (EngineTypeID <= 0 || EngineID.Length == 0 || EngineType.Length == 0)
            {
                MIS_BASE.WritePLC(34, OpName, true);
                string msg = "【" + OpName + "】" + "PLC传递机型为空！";
                MyLog4Net.MyLogHelper.Error("EngineTypeGetOver", msg);
                SendMessageFun.AsyncSendMessage_Notice(OpName, msg);
                return;
            }

            MIS_BASE.Write_MesReadOver(OpName, false);       //保存完成
            MIS_BASE.Write_MaterialVerifyOver(OpName, false);  //工作完成信号
            MIS_BASE.Write_FixAllow(OpName, true); // 允许工作

            //电子看板_装配零件_临时表_增加_北汽
            //第二步，将零件信息转移到零件_临时表中
            // BaseDataSystemMES.MesServer_Process_EngineTypeOverBQ(OpName);

            //通知web显示
            //SendMessageFun.SendMessage("123", "111", OpName);
            //MIS_BASE.Read_PalletInfo(OpName, out MES_QualityMask);//合格标志  合格标志暂时改为即时响应式的
            //MIS_BASE.Read_RepairStatus_PLC(OpName, out RepairPartStatusPLC);//返修标志
            //SendMessageFun.SendInfomation("QualityMask", Convert.ToString(MES_QualityMask), OpName);//显示合格标志
            //SendMessageFun.SendInfomation("RepairPartStatusPLC", Convert.ToString(RepairPartStatusPLC), OpName);//显示返修标志



            //if (MES_QualityMask == 2)
            //{
            // 暂时先屏蔽掉
            ////工作完成
            //MIS_BASE.Write_MaterialVerifyOver(OpName, true);
            //SendMessageFun.SendInfomation("NgGO", "1", OpName);//显示不合格标志
            //return;
            //  }

            //第三步，用于工件离开后完工数量统计及工件编号追溯
            //BaseDataSystemMES.MaterialPush_EngineIDStatus_Insert(OpName);//更新订单产量

            //第四步，获取是否允许工作
            //BaseDataSystemMES.MesServer_Judge_IsCanWork(OpName, out IsAllowWork);

            //暂时先定义为扫描完成才能进行压装工作，因为考虑到工作完成后，操作工未必会去扫描物料的情况
            //if (IsAllowWork == 1)
            //{
            //    MIS_BASE.Write_MesReadOver(OpName, false);       //允许保存信号
            //    MIS_BASE.Write_MaterialVerifyOver(OpName, false);  //工作完成信号
            //    MIS_BASE.Write_FixAllow(OpName, true);

            //    // 判断有没有PLC传递机型 没有就不给
            //    //bool isEngine =  Convert.ToBoolean(MIS_BASE.ReadPLC(44, OpName));
            //    //if (isEngine)
            //    //{
            //    //    //通知PLC允许工作,允许工作在保存完成时清空
            //    //    MIS_BASE.Write_FixAllow(OpName, true);
            //    //}
            //    //else
            //    //{
            //    //    MyLog4Net.MyLogHelper.Error($"{OpName}给允许工作时无传递机型：", $"Message:");
            //    //}

            //}
            //else
            //{
            //    SendMessageFun.AsyncSendMessage_Notice(OpName, "请扫描物料！");
            //}

        }

        /// <summary>
        /// 二次工作
        /// </summary>
        /// <param name="OpName"></param>
        private void EngineTypeGetOver_PLC_Work_two(string OpName)
        {
            int EngineTypeID;//机型代码
            int PartPallet_Code;//托盘编号

            string EngineType;//机型
            string EngineID;//工件编号
            string OrderForm;
            MIS_BASE.GetEngineTypeFromPLC(OpName, out EngineTypeID, out EngineType, out EngineID, out PartPallet_Code, out OrderForm);
            EngineTypeGetOver_PLC_Work(OpName, EngineTypeID, EngineType, EngineID, Convert.ToInt32(PartPallet_Code), OrderForm);

        }
        /// <summary>
        /// 跳过二次工作
        /// </summary>
        /// <param name="OpName"></param>
        private void EngineTypeGetOver_PLC_Work_Skip(string OpName)
        {
            //MIS_BASE.Write_MesReadOver(OpName, true);
            MIS_BASE.Write_MaterialVerifyOver(OpName, true);
        }

        /// <summary>
        /// 返修件需要工作
        /// </summary>
        /// <param name="OpName">工位号</param>
        private void IsNeedRepaire_OK(string OpName)
        {
            string orderForm = "";
            int engineTypeID;
            string engineType = "";
            string engineID = "";
            string palletCode = "";
            int isRepair;
            string repairCode = "";
            //从监控系统中查询出本工位信息
            BaseDataSystemMES.OpName_MIS_Moby_Select(OpName,
            out orderForm, out engineTypeID, out engineType,
            out engineID, out palletCode, out isRepair, out repairCode);

            EngineTypeGetOver_PLC_Work(OpName, engineTypeID, engineType, engineID, Convert.ToInt32(palletCode), orderForm);
        }

        /// <summary>
        /// 更新待上料数量
        /// </summary>
        /// <param name="OpName"></param>
        private void UpdateWait_NUM_PLC(object e)
        {
            DoWhatPlc.CustomeEvetnArgs msgEvent = (DoWhatPlc.CustomeEvetnArgs)e;

            string OpName = Convert.ToString(msgEvent.OpName);
            int tagValue = Convert.ToInt32(msgEvent.TagValue);
            // 更新待上料数量到数据库
            Db.UpdateWait_NUM_PLC(OpName, tagValue);
        }



        /// <summary>
        /// 空料握手plc
        /// </summary>
        /// <param name="OpName"></param>
        private void Handshake_Fun(object e)
        {

            DoWhatPlc.CustomeEvetnArgs msgEvent = (DoWhatPlc.CustomeEvetnArgs)e;
            string OpName = Convert.ToString(msgEvent.OpName);
            int tagValue = Convert.ToInt32(msgEvent.TagValue);

            if (tagValue == 1)
            {
                int planCount = 0; // 计划上料数量
                int haveUplaodCount = 0; // 已上料数量
                int remainingQuantity = 0; // 待上料数量
                Db.GethandType_Order(OpName, out int EngineTypeID,
                        out string EngineType, out string EngineID, out string OrderForm,
                        out int isCheckOk, out planCount, out haveUplaodCount, out remainingQuantity);
                if (isCheckOk == 2)
                {

                    MIS_BASE.Write_EngineTypeID_MES(OpName, 0);
                    MIS_BASE.Write_EngineType_MES(OpName, "");
                    MIS_BASE.Write_EngineID_MES(OpName, "");
                    MIS_BASE.Write_OrderForm_MES(OpName, "");

                    // 写回空值
                    MIS_BASE.WritePLC(95, OpName, planCount);
                    MIS_BASE.WritePLC(96, OpName, haveUplaodCount);
                    MIS_BASE.WritePLC(97, OpName, remainingQuantity);
                    // 发送MES握手
                    MIS_BASE.WritePLC(35, OpName, true);
                    return;
                }
                else
                {
                    BaseDataSystemMES.OpName_MIS_MOBY_Insert(OpName, MobyTagType.EngineID_MES, EngineID);

                    // 写入机型代码 （大机型） 机型 发动机号 订单号
                    MIS_BASE.Write_EngineTypeID_MES(OpName, EngineTypeID);
                    MIS_BASE.Write_EngineType_MES(OpName, EngineType);
                    MIS_BASE.Write_EngineID_MES(OpName, EngineID);
                    MIS_BASE.Write_OrderForm_MES(OpName, OrderForm);

                    MIS_BASE.WritePLC(95, OpName, planCount);
                    MIS_BASE.WritePLC(96, OpName, haveUplaodCount);
                    MIS_BASE.WritePLC(97, OpName, remainingQuantity);

                    // 发送MES握手
                    MIS_BASE.WritePLC(35, OpName, true);
                }
            }
            else
            {
                MIS_BASE.WritePLC(35, OpName, false);
            }
        }
    }
}