using System;
using MesDataFunction;
using MesServerWork;
using MisDataFunDll;

namespace MesServerFunctions
{
    partial class FunctionMES
    {
        /// <summary>
        /// 分线上总线的数量
        /// </summary>
        public static int SubLineLoadPartCount = 2;
        /// <summary>
        /// 分线上总线已经匹配的数量
        /// </summary>
        public static int SubLineLoadPartCountMatch = 0;
        /// <summary>
        /// 正常逻辑工作
        /// </summary>
        /// <param name="OpName"></param>
        /// <param name="EngineTypeID"></param>
        /// <param name="EngineType"></param>
        /// <param name="EngineID"></param>
        /// <param name="PartPallet_Code"></param>
        private void EngineTypeGetOver_PLC_Work(string OpName, int EngineTypeID, string EngineType, string EngineID, int PartPallet_Code,string OrderForm)
        {
            int IsAllowWork;
            //第一步，将拧紧的信息放入到临时表里
            MisDataFun.MesServer_ShaftPosition_EngineTypeOver(OpName);

            //第四步，获取是否允许工作
            MisDataFun.MesServer_Judge_IsCanWork(OpName, out IsAllowWork);

            string msg1 = "拧紧信息转入临时表完成！";
            MisDataFun.LogRecording_OP(OpName, "INFO", "EngineTypeGetOver", msg1);
            // 暂时先定义为扫描完成才能进行压装工作，因为考虑到工作完成后，操作工未必会去扫描物料的情况
            if (IsAllowWork == 1)
            {
                //通知PLC允许工作,允许工作在保存完成时清空
                MIS_BASE.Write_FixAllow(OpName, true);
            }
            else
            {
                SendMessageFun.AsyncSendMessage_Notice(OpName, "请扫描物料！");
            }
        }


        /// <summary>
        /// 保存MOBY信息
        /// </summary>
        /// <param name="OpName"></param>
        /// <param name="engineTypeID"></param>
        /// <param name="engineType"></param>
        /// <param name="engineID"></param>
        private void SaveMobyMessage(string OpName, int engineTypeID, string engineType, string engineID, string orderForm)
        {

            if (MIS_BASE.hashtable_EngineGetOver_EngineTypeID == null)
            {
                MIS_BASE.InitHashtable_MesServerCode();
            }
            if (MIS_BASE.hashtable_EngineGetOver_EngineTypeID.ContainsKey(OpName))
            {
                MIS_BASE.hashtable_EngineGetOver_EngineTypeID[OpName] = engineTypeID;
            }
            if (MIS_BASE.hashtable_EngineGetOver_EngineType.ContainsKey(OpName))
            {
                MIS_BASE.hashtable_EngineGetOver_EngineType[OpName] = engineType;
            }
            if (MIS_BASE.hashtable_EngineGetOver_EngineID.ContainsKey(OpName))
            {
                MIS_BASE.hashtable_EngineGetOver_EngineID[OpName] = engineID;
            }
            if (MIS_BASE.hashtable_EngineGetOver_OrderForm.ContainsKey(OpName))
            {
                MIS_BASE.hashtable_EngineGetOver_OrderForm[OpName] = orderForm;
            }
        }

        /// <summary>
        /// 跳过二次工作
        /// </summary>
        /// <param name="OpName"></param>
        private void EngineTypeGetOver_PLC_Work_Skip(string OpName)
        {

            MIS_BASE.Write_MesWorkFinish(OpName, true);
        }


        /// <summary>
        /// 二次工作
        /// </summary>
        /// <param name="OpName"></param>
        private void EngineTypeGetOver_PLC_Work_two(string OpName)
        {
            MisDataFun.LogRecording_OP(OpName, "INFO", "MIS", "PLC传递机型！");
            MIS_BASE.Write_TagValueByTagTypeID(34, OpName, false); // 复位报警（MES）

            int EngineTypeID;//机型代码
            string EngineType;//机型
            string EngineID;//工件编号
            string OrderForm; // 工单号
            int PartPallet_Code;//托盘编号

            MIS_BASE.GetEngineTypeFromPLC(OpName, out EngineTypeID, out EngineType, out EngineID, out PartPallet_Code, out OrderForm);

            // 判断PLC机型是否写入
            if (EngineTypeID <= 0 || EngineID == "")
            {
                MIS_BASE.Write_TagValueByTagTypeID(34, OpName, true);// MES报警
                string msg = "【" + OpName + "】" + "PLC机型写入为空，EngineTypeID：" + EngineTypeID + "，EngineID：" + EngineID;
                SendMessage.AsyncSendMessage_Notice(OpName, msg);
                MisDataFun.LogRecording_OP(OpName, "ERROR", "EngineTypeGetOver", msg);
                return;
            }

            // PDC产线plc只写了发动机号和机型代码，其余要从数据库中读取
            MisDataFun.Moby_Select_PDC(EngineID, out OrderForm, out EngineType, out EngineTypeID);

            MisDataFun.OpName_MIS_MOBY_Insert(OpName, EngineTypeID, EngineType, EngineID, PartPallet_Code, OrderForm, 0, 0, "");
            EngineTypeGetOver_PLC_Work(OpName, EngineTypeID, EngineType, EngineID, PartPallet_Code, OrderForm);

        }

        /// <summary>
        /// 返修件需要工作
        /// </summary>
        /// <param name="OpName">工位号</param>
        private void IsNeedRepaire_OK(string OpName)
        {

            //int isRepair;
            //int engineTypeID;

            //string engineType = "";
            //string engineID = "";
            //string palletCode = "";
            //string orderForm = "";
            //string repairCode = "";
            ////从监控系统中查询出本工位信息
            //BaseDataSystemMES.OpName_MIS_Moby_Select(OpName,
            //out  orderForm, out  engineTypeID, out  engineType,
            //out  engineID, out palletCode, out isRepair, out repairCode);

            //EngineTypeGetOver_PLC_Work(OpName, engineTypeID, engineType, engineID, Convert.ToInt32(palletCode),orderForm);
        }
        /// <summary>
        /// 正常匹配分线和总线
        /// </summary>
        /// <param name="opName"></param>
        /// <param name="engineID">总线工件号</param>
        /// <param name="engineTypeID">总线工件机型代码</param>
        /// <param name="engineType">总线工件机型</param>
        private void Match(string opName, string engineID, int engineTypeID, string engineType, int PartPallet_Code)
        {
            //try
            //{
            //    bool m_EngineGetOver_PLC_SubLine;
            //    int engineTypeID_SubLine;
            //    int partPallet_Code_SubLine;
            //    int PalletInfo = 1;//总线托盘状态

            //    string opName_SubLine = "";//分线工件信息
            //    string engineID_SubLine;
            //    string engineType_SubLine;
            //    string AlarmStr;
            //    if (MIS_BASE.hashtable_OpNameRepair == null)
            //    {
            //        MIS_BASE.InitHashtable_MesServerCode();
            //    }
            //    //第一步：获取分线中间交互工位号
            //    if (MIS_BASE.hashtable_OpNameRepair.ContainsKey(opName))
            //    {
            //        opName_SubLine = MIS_BASE.hashtable_OpNameRepair[opName].ToString();
            //    }
            //    if (opName_SubLine == "")
            //    {
            //        return;
            //    }

            //    //第二步：获取分线传递机型信号
            //    MIS_BASE.Read_EngineGetOver_PLC(opName_SubLine, out m_EngineGetOver_PLC_SubLine);
            //    if (!m_EngineGetOver_PLC_SubLine) return;//必须工件同时到位才能进行匹配

            //    //第三步：判断合格标志
            //    MIS_BASE.Read_PalletInfo(opName_SubLine, out  PalletInfo);
            //    if (PalletInfo == 2) return; //若不合格则返回不进行匹配
            //    string OrderForm;
            //    //第四步：获取分线的信息，匹配验证
            //    MIS_BASE.GetEngineTypeFromPLC(opName_SubLine, out engineTypeID_SubLine, out engineType_SubLine, out engineID_SubLine, out partPallet_Code_SubLine,out OrderForm);
            //    //判断分线数据是否合格
            //    //if (!BaseDataSystemMES.QulityDataVerify(opName, engineID_SubLine, out AlarmStr) && !BaseDataSystemMES.QualityVerifyStatus_Hash_Read(opName))
            //    //{
            //    //    SendInfomation("LineoutAlert", AlarmStr, opName);
            //    //    return;
            //    //}

            //    if (engineTypeID_SubLine == engineTypeID)
            //    {
            //        BaseDataSystemMES.SubLineLoadPartCountMatch_Select(opName, out SubLineLoadPartCountMatch);
            //        SubLineLoadPartCountMatch = SubLineLoadPartCountMatch + 1;
            //        BaseDataSystemMES.SubLineLoadPartCountMatch_Update(opName, SubLineLoadPartCountMatch);


            //        BaseDataSystemMES.MailLineAndSubLineData_Insert(engineID, engineTypeID, engineType, engineID_SubLine);//分线上总线数据转移
            //        MIS_BASE.Write_Match(opName, true);//匹配结果
            //        MIS_BASE.Write_MatchingCompleted(opName, true);//匹配完成
            //        if(SubLineLoadPartCountMatch== SubLineLoadPartCount)
            //        {
            //            MIS_BASE.Write_FixAllow(opName, true);
            //            SubLineLoadPartCountMatch = 0;
            //            BaseDataSystemMES.SubLineLoadPartCountMatch_Update(opName, SubLineLoadPartCountMatch);

            //        }

            //        SendMessageFun.SendInfomation("MatchSuccess", "1", opName);
            //        sendmessage(opName, 1, "Match");//匹配结果
            //    }
            //    else
            //    {
            //        MIS_BASE.Write_Match(opName, false);//匹配结果
            //        MIS_BASE.Write_MatchingCompleted(opName, true);//匹配完成//68:1、取消返修；2、匹配成功  自己监控发送 MES|MatchingCompleted

            //        //发送匹配完成和匹配结果信息
            //        SendMessageFun.AsyncSendMessage_Notice(opName,"匹配失败，工件型号不匹配！");
            //        SendMessageFun.SendInfomation("MatchSuccess", "0", opName);
            //        sendmessage(opName, 0, "Match");//匹配结果
            //    }

            //}
            //catch (Exception err)
            //{
            //    ////ApplicationLog.WriteLog("Match:" + err.ToString());

            //}
        }



        /// <summary>
        /// 强制匹配分线和总线
        /// </summary>
        /// <param name="opName"></param>
        private void ForceMatch(string opName)
        {
            //try
            //{
            //    bool m_EngineGetOver_PLC_SubLine;
            //    bool m_EngineGetOver_PLC;

            //    int engineTypeID_SubLine;
            //    int engineTypeID;
            //    int partPallet_Code_SubLine;
            //    int partPallet_Code;

            //    string opName_SubLine = "";//分线工件信息
            //    string engineID_SubLine;
            //    string engineType_SubLine;
            //    string engineID;
            //    string engineType;
            //    if (MIS_BASE.hashtable_OpNameRepair == null)
            //    {
            //        MIS_BASE.InitHashtable_MesServerCode();
            //    }
            //    //获取分线中间交互工位号
            //    if (MIS_BASE.hashtable_OpNameRepair.ContainsKey(opName))
            //    {
            //        opName_SubLine = MIS_BASE.hashtable_OpNameRepair[opName].ToString();
            //    }
            //    if (opName_SubLine == "")
            //    {
            //        return;
            //    }

            //    MIS_BASE.Read_EngineGetOver_PLC(opName_SubLine, out m_EngineGetOver_PLC_SubLine);//1:读取分线工件到位的传递机型信号。

            //    if (!m_EngineGetOver_PLC_SubLine) return;//必须工件同时到位才能进行匹配

            //    MIS_BASE.Read_EngineGetOver_PLC(opName, out m_EngineGetOver_PLC);//2:读取总线工件到位的传递机型信号。

            //    if (!m_EngineGetOver_PLC) return;//必须工件同时到位才能进行匹配
            //    string OrderForm;
            //    MIS_BASE.GetEngineTypeFromPLC(opName_SubLine, out engineTypeID_SubLine, out engineType_SubLine, out engineID_SubLine, out partPallet_Code_SubLine,out  OrderForm);//获取分线的信息
            //    MIS_BASE.GetEngineTypeFromPLC(opName, out engineTypeID, out engineType, out engineID, out partPallet_Code, out OrderForm);

            //    BaseDataSystemMES.MailLineAndSubLineData_Insert(engineID, engineTypeID, engineType, engineID_SubLine);//分线上总线数据转移

            //    MIS_BASE.Write_Match(opName, true);//匹配结果
            //    MIS_BASE.Write_MatchingCompleted(opName, true);//匹配完成

            //    SendMessageFun.SendInfomation("MatchSuccess", "1", opName);//界面显示匹配成功

            //    MIS_BASE.Write_FixAllow(opName, true);//允许PLC工作

            //    //发送匹配完成和匹配结果信息
            //    sendmessage(opName, 1, "MatchingComplete");//匹配完成
            //    sendmessage(opName, 1, "Match");//匹配结果
            //}
            //catch
            //{

            //}
        }
    }
}