using System;
using System.Data;
using MesServerWork;
using MisDataFunDll;

namespace MesServerFunctions
{
    partial class FunctionMES
    {
        /// <summary>
        /// 正常逻辑工作(传递机型)
        /// </summary>
        /// <param name="OpName"></param>
        /// <param name="EngineTypeID"></param>
        /// <param name="EngineType"></param>
        /// <param name="EngineID"></param>
        /// <param name="PartPallet_Code"></param>
        private void EngineTypeGetOver_PLC_Work(string OpName, int EngineTypeID, string EngineType, string EngineID, int PartPallet_Code,string OrderForm)
        {
            int IsAllowWork;
            int RepairPartStatusPLC = 0;
            //第一步，将操作指南转移到操作指南_临时表中
            MisDataFun.MesServer_ProcessList_EngineTypeOver(OpName);
            //第二步，将零件信息转移到零件_临时表中
            MisDataFun.MesServer_Process_EngineTypeOver(OpName);

            //通知web显示
            SendMessageFun.SendMessage("5123", "1111", OpName);
       
            MIS_BASE.Read_RepairStatus_PLC(OpName, out RepairPartStatusPLC);//返修标志
            // 通知web返修标志
            SendMessageFun.SendInfomation("RepairPartStatusPLC", Convert.ToString(RepairPartStatusPLC), OpName);//显示返修标志

            //第四步，获取是否允许工作
            MisDataFun.MesServer_Judge_IsCanWork(OpName, out IsAllowWork);

            //暂时先定义为扫描完成才能进行压装工作，因为考虑到工作完成后，操作工未必会去扫描物料的情况
            if (IsAllowWork == 1)
            {
                //通知PLC允许工作,允许工作在保存完成时清空
                MIS_BASE.Write_FixAllow(OpName, true);
            }
            else
            {
                SendMessageFun.AsyncSendMessage_Notice(OpName, "请扫描物料！");
            }

        }

        /// <summary>
        /// 二次工作
        /// </summary>
        /// <param name="OpName"></param>
        private void EngineTypeGetOver_PLC_Work_two(string OpName)
        {
            MisDataFun.LogRecording_OP(OpName, "INFO", "MIS", "PLC传递机型！");
            MIS_BASE.Write_TagValueByTagTypeID(34, OpName, false); // 复位报警（MES）

            int EngineTypeID;//机型代码
            string EngineType;//机型
            string EngineID;//工件编号
            string OrderForm; // 工单号
            int PartPallet_Code;//托盘编号

            MIS_BASE.GetEngineTypeFromPLC(OpName, out EngineTypeID, out EngineType, out EngineID, out PartPallet_Code, out OrderForm);

            // 判断PLC机型是否写入
            if (EngineTypeID <= 0 || EngineID == "")
            {
                MIS_BASE.Write_TagValueByTagTypeID(34, OpName, true);// MES报警
                string msg = "【" + OpName + "】" + "PLC机型写入为空，EngineTypeID：" + EngineTypeID + "，EngineID：" + EngineID;
                SendMessage.AsyncSendMessage_Notice(OpName, msg);
                MisDataFun.LogRecording_OP(OpName, "ERROR", "EngineTypeGetOver", msg);
                return;
            }

            // PDC产线plc只写了发动机号和机型代码，其余要从数据库中读取
            MisDataFun.Moby_Select_PDC(EngineID, out OrderForm, out EngineType, out EngineTypeID);

            MisDataFun.OpName_MIS_MOBY_Insert(OpName, EngineTypeID, EngineType, EngineID, PartPallet_Code, OrderForm, 0, 0, "");
            EngineTypeGetOver_PLC_Work(OpName, EngineTypeID, EngineType, EngineID, PartPallet_Code, OrderForm);

        }
        /// <summary>
        /// 跳过二次工作
        /// </summary>
        /// <param name="OpName"></param>
        private void EngineTypeGetOver_PLC_Work_Skip(string OpName)
        {

            MIS_BASE.Write_MesWorkFinish(OpName, true);
        }

        /// <summary>
        /// 返修件需要工作
        /// </summary>
        /// <param name="OpName">工位号</param>
        private void IsNeedRepaire_OK(string OpName)
        {
            //string orderForm = "";
            //int engineTypeID;
            //string engineType = "";
            //string engineID = "";
            //string palletCode = "";
            //int isRepair;
            //string repairCode = "";
            ////从监控系统中查询出本工位信息
            //BaseDataSystemMES.OpName_MIS_Moby_Select(OpName,
            //out  orderForm, out  engineTypeID, out  engineType,
            //out  engineID, out palletCode, out isRepair, out repairCode);

            //EngineTypeGetOver_PLC_Work(OpName, engineTypeID, engineType, engineID, Convert.ToInt32(palletCode),orderForm);
        
        }


        

    }
}