MVP!

MisDataFunction/Function1055/Methods/AllowTighteningStep.cs

@@ -0,0 +1,114 @@
+using System;
+using MesServerWork;
+using MisDataFunDll;
+//using SystemFramework;
+
+namespace MesServerFunctions
+{
+    partial class FunctionMES
+    {
+        /// <summary>
+        /// 初始化处理工序工步执行过程
+        /// </summary>
+        private void InitWorkStep(string OpName, int engineTypeID, string engineType, string engineID)
+        {
+            try
+            {
+                NextWorkStep(OpName, engineTypeID, engineType, engineID);
+            }
+            catch (Exception err)
+            {
+                ////ApplicationLog.WriteLog(err, err.Message);
+            }
+        }
+
+        /// <summary>
+        /// 处理工序工步执行过程下一步信息
+        /// </summary>
+        private void NextWorkStep(string OpName, int engineTypeID, string engineType, string engineID)
+        {
+            int workStepProperty = 512;
+
+
+            if (MIS_BASE.hashtable_workStepProperty == null)
+            {
+                MIS_BASE.InitHashtable_MesServerCode();
+            }
+            //获取工步属性
+            if (MIS_BASE.hashtable_workStepProperty.ContainsKey(OpName))
+            {
+                workStepProperty = Convert.ToInt32(MIS_BASE.hashtable_workStepProperty[OpName]);
+            }
+
+            //16和64都表示分步保存质量数据（B6中并不是表示正常拧紧与返修拧紧的关系）
+            if (workStepProperty == 16 || workStepProperty == 64)
+            {
+                int BoltCode = 0;
+                int ProcessCode = 512;
+                bool isHaveNg = false;
+
+                bool sn_WorkingStepIsOver = GetShaftWoringStepIsWorked_WorkGroup(OpName, engineTypeID, engineType, out ProcessCode, out BoltCode, out workStepProperty, out isHaveNg);
+
+                if (!sn_WorkingStepIsOver)
+                {
+                    // 显示弹窗与图片 不知道为啥没有 后加读
+                    SendInfomation("ShaftPosition", "1", OpName);
+                    //发动UDP,通知MES工作站拧紧第几组
+                    SendInfomation("FixAllowGuid", Convert.ToString(ProcessCode) + "&" + Convert.ToString(BoltCode), OpName);//显示拧紧标志
+
+                    //写入拧紧顺序
+                    MIS_BASE.Write_ProcessCode(OpName, ProcessCode);
+
+                    //写入子程序(套筒号)
+                    MIS_BASE.Write_BoltCode(OpName, BoltCode);
+
+                    //通知PLC允许工作
+                    MIS_BASE.Write_FixAllow(OpName, true);
+                    MisDataFun.LogRecording_OP(OpName, "INFO", "MIS", "MES允许手动拧紧！位置：" + ProcessCode.ToString() + "，套筒：" + BoltCode.ToString());
+                }
+                else
+                {
+                    // 是否存在拧紧不合格的
+                    if (!isHaveNg)
+                    {
+                        MIS_BASE.Write_ConfirmOkGo(OpName, true);
+                        MIS_BASE.Write_FalseGO(OpName, false);
+                        MisDataFun.LogRecording_OP(OpName, "INFO", "MIS", "MES所有拧紧任务完成！");
+                    }
+                }
+            }
+        }
+
+        /// <summary>
+        /// 判断是否还有需要拧紧的组号 ProcessCode=拧紧序号 BoltCode=套筒号
+        /// </summary>
+        /// <param name="opName"></param>
+        /// <param name="engineTypeID"></param>
+        /// <param name="engineType"></param>
+        /// <param name="ProcessCode">拧紧序号</param>
+        /// <param name="BoltCode">套筒号</param>
+        /// <returns></returns>
+        private bool GetShaftWoringStepIsWorked_WorkGroup(string opName, int engineTypeID, string engineType, out int ProcessCode, out int BoltCode, out int workStepProperty, out bool isHaveNg)
+        {
+            ProcessCode = 0;
+            BoltCode = 0;
+            workStepProperty = 0;
+            bool sn_WorkingStepIsOver = true;//是否完成拧紧
+            isHaveNg = false;//是否有拧紧不合格
+
+            //电子看板_工位机型_质量数据测量位置_临时表_查询_完成情况
+            MisDataFun.MesServer_ShaftPosition_Select_FinishResult(opName, out ProcessCode, out BoltCode, out workStepProperty, out sn_WorkingStepIsOver, out isHaveNg);
+            if (MIS_BASE.hashtable_WorkGroupIndex == null)
+            {
+                MIS_BASE.InitHashtable_MesServerCode();
+            }
+
+            //记录当前拧紧序号
+            if (MIS_BASE.hashtable_WorkGroupIndex.ContainsKey(opName))
+            {
+                MIS_BASE.hashtable_WorkGroupIndex[opName] = ProcessCode;
+            }
+            return sn_WorkingStepIsOver;
+        }
+    }
+}