using System;
using System.Data;
using bizFacade;
using MesServerWork;
using MesWorkMqtt;
using System.Threading.Tasks;

namespace MesServerFunctions
{
    partial class FunctionMES
    {
        /// <summary>
        /// 正常逻辑工作(传递机型)
        /// </summary>
        /// <param name="OpName"></param>
        /// <param name="EngineTypeID"></param>
        /// <param name="EngineType"></param>
        /// <param name="EngineID"></param>
        /// <param name="PartPallet_Code"></param>
        private void EngineTypeGetOver_PLC_Work(string OpName, int EngineTypeID, string EngineType, string EngineID, int PartPallet_Code,string OrderForm)
        {
            int IsAllowWork;
            int RepairPartStatusPLC = 0;
            int MES_QualityMask = 1;
            
            //电子看板_装配零件_临时表_增加_北汽
            //第二步，将零件信息转移到零件_临时表中
            BaseDataSystemMES.MesServer_Process_EngineTypeOverBQ(OpName);

            //通知web显示
            SendMessageFun.SendMessage("123", "111", OpName);
            //MIS_BASE.Read_PalletInfo(OpName, out MES_QualityMask);//合格标志  合格标志暂时改为即时响应式的
            MIS_BASE.Read_RepairStatus_PLC(OpName, out RepairPartStatusPLC);//返修标志
            //SendMessageFun.SendInfomation("QualityMask", Convert.ToString(MES_QualityMask), OpName);//显示合格标志
            SendMessageFun.SendInfomation("RepairPartStatusPLC", Convert.ToString(RepairPartStatusPLC), OpName);//显示返修标志

            if (MES_QualityMask == 2)
            {
                // 暂时先屏蔽掉
                ////工作完成
                //MIS_BASE.Write_MaterialVerifyOver(OpName, true);
                //SendMessageFun.SendInfomation("NgGO", "1", OpName);//显示不合格标志
                //return;
            }

            //第三步，用于工件离开后完工数量统计及工件编号追溯
            //BaseDataSystemMES.MaterialPush_EngineIDStatus_Insert(OpName);//更新订单产量

            // 判断是否为下线工位，若是的话就发送打印条码请求
            if (OpName == "OP070")
            {
                // 调用存储过程
                DataTable CodeDt = BaseDataSystemMES.Create_OutLineBarCode(EngineID, OrderForm);
                Task.Run(() => Mqtt.Publish("MesPrint", $"OP080~01~HL_001|QR_Code^Code3^{CodeDt.Rows[0]["条码"]}|TEXT^TEXT4^{CodeDt.Rows[0]["第二部分"]}|TEXT^TEXT3^{CodeDt.Rows[0]["第一部分"]}|TEXT^TEXT0^{CodeDt.Rows[0]["工厂编号"]}|TEXT^TEXT5^{CodeDt.Rows[0]["不合格文本"]}"));
            }

            //第四步，获取是否允许工作
            BaseDataSystemMES.MesServer_Judge_IsCanWork(OpName, out IsAllowWork);
         
            //暂时先定义为扫描完成才能进行压装工作，因为考虑到工作完成后，操作工未必会去扫描物料的情况
            if (IsAllowWork == 1)
            {
                //通知PLC允许工作,允许工作在保存完成时清空
                MIS_BASE.Write_FixAllow(OpName, true);
            }
            else
            {
                SendMessageFun.AsyncSendMessage_Notice(OpName, "请扫描物料！");
            }

        }

        /// <summary>
        /// 二次工作
        /// </summary>
        /// <param name="OpName"></param>
        private void EngineTypeGetOver_PLC_Work_two(string OpName)
        {
            int EngineTypeID;//机型代码
            int PartPallet_Code;//托盘编号

            string EngineType;//机型
            string EngineID;//工件编号
            string OrderForm;
            MIS_BASE.GetEngineTypeFromPLC(OpName, out EngineTypeID, out EngineType, out EngineID, out PartPallet_Code, out OrderForm);
            EngineTypeGetOver_PLC_Work(OpName, EngineTypeID, EngineType, EngineID, Convert.ToInt32(PartPallet_Code), OrderForm);

        }
        /// <summary>
        /// 跳过二次工作
        /// </summary>
        /// <param name="OpName"></param>
        private void EngineTypeGetOver_PLC_Work_Skip(string OpName)
        {
            MIS_BASE.Write_MesReadOver(OpName, true);
            MIS_BASE.Write_MaterialVerifyOver(OpName, true);
        }

        /// <summary>
        /// 返修件需要工作
        /// </summary>
        /// <param name="OpName">工位号</param>
        private void IsNeedRepaire_OK(string OpName)
        {
            string orderForm = "";
            int engineTypeID;
            string engineType = "";
            string engineID = "";
            string palletCode = "";
            int isRepair;
            string repairCode = "";
            //从监控系统中查询出本工位信息
            BaseDataSystemMES.OpName_MIS_Moby_Select(OpName,
            out  orderForm, out  engineTypeID, out  engineType,
            out  engineID, out palletCode, out isRepair, out repairCode);

            EngineTypeGetOver_PLC_Work(OpName, engineTypeID, engineType, engineID, Convert.ToInt32(palletCode),orderForm);
        }




    }
}