using System;
using MesServerWork;
using System.Threading;
using MisDataSaveDate;
using System.Collections;
//using SystemFramework;
namespace MesServerFunctions
{
partial class FunctionMES
{
///
/// 处理WEB页面发送过来的请求（m_Command + "|" + m_Value;）
///
///
///
private void WebSubmit(object e)
{
try
{
DeviceDriver_BasicData.CustomeEvetnArgs msgEvent = (DeviceDriver_BasicData.CustomeEvetnArgs)e;
string OpName=Convert.ToString(msgEvent.OpName);
string Content = Convert.ToString(msgEvent.TagValue);
string[] dataArray = Content.Split('|');
if (dataArray.Length != 2)
return;
//消息类型
string m_Command = dataArray[0].ToString();
//消息参数
string m_Value = dataArray[1].ToString();
//消息参数数量
string[] m_Value_array = m_Value.Split('&');
//消息参数长度
int m_Value_length = m_Value_array.Length;
//工件信息
string engineID = "";
if (MIS_BASE.hashtable_EngineGetOver_EngineTypeID == null)
{
MIS_BASE.InitHashtable_MesServerCode();
}
if (MIS_BASE.hashtable_EngineGetOver_EngineTypeID == null)
{
return;
}
if (MIS_BASE.hashtable_EngineGetOver_EngineID.ContainsKey(OpName))
{
engineID = MIS_BASE.hashtable_EngineGetOver_EngineID[OpName].ToString();
}
DeviceDriver_BasicData.CustomeEvetnArgs _e = new DeviceDriver_BasicData.CustomeEvetnArgs();
_e.OpName = OpName;
_e.TagValue = m_Value;
//根据请求的命令处理逻辑
switch (m_Command)
{
case "Barcode":
if (m_Value_length > 1) return;
fun_Barcode(_e);
break;
case "OnLineState"://在线0、离线1、屏蔽2
try
{
if (m_Value_length > 1) return;
int a = Convert.ToInt32(m_Value);
if (a <= 2)
{
//BaseDataSystemMES.IsOnLine_Update(OpName, m_Value.ToString());
MIS_BASE.Write_OnLineState(OpName, Convert.ToInt32(m_Value));
if (a == 2) SendMessage.AsyncSendMessage_Notice(OpName, "屏蔽MES！");
if (a == 0) SendMessage.AsyncSendMessage_Notice(OpName, "启用MES！");
}
}
catch
{
}
break;
case "Reset"://复位，将MES所有的信息都复位了
SetMoby(OpName);//将MES所有信号清空
break;
case "FixAllow"://重新拧紧
MIS_BASE.Write_FixAllow(OpName, false);
MIS_BASE.Write_FixAllow(OpName, true);
break;
case "IsAutoGetEngineID"://自动手动申请编号（线首）
if (m_Value_length > 1) return;
MIS_BASE.Write_IsAutoGetEngineID(OpName, Convert.ToInt32(m_Value));
break;
case "PartPalletGoOver"://空托盘放行
int Is_PartPalletGoOver;
MIS_BASE.Read_PartPalletGoOver(OpName, out Is_PartPalletGoOver);
if (Is_PartPalletGoOver == 1)
{
MIS_BASE.Write_PartPalletGoOver(OpName, 1);
}
else
{
MIS_BASE.Write_PartPalletGoOver(OpName,0);
}
break;
case "SetMoby"://清空托盘（线首）
SetMoby(OpName);//将MES所有信号清空
//MIS_BASE.Write_PartPalletCode_PLC(OpName, 1);
break;
case "RepairUplineMES"://返修上线
MIS_BASE.Write_RepairUpline_MES(OpName, true);
break;
case "CancelRepair"://将返修件置为正常件
break;
case "PartPalletCode"://申请写入托盘号
//MIS_BASE.Write_PartPalletCode_PLC(OpName, 1);
break;
case "WritePartPalletCode"://写入托盘号
if (m_Value_length > 1) return;
MIS_BASE.Write_PalletCode(OpName, Convert.ToInt32(m_Value));
break;
case "Normal"://启用正常拧紧工位
MIS_BASE.Write_Normal(OpName, 1);
MIS_BASE.Write_UnNormal(OpName, 0);
break;
case "UnNormal"://启用备用拧紧工位
MIS_BASE.Write_Normal(OpName, 0);
MIS_BASE.Write_UnNormal(OpName, 1);
break;
case "ResetDevice"://复位设备
MIS_BASE.Write_ResetDevice(OpName, true);
System.Threading.Thread.Sleep(1000);
MIS_BASE.Write_ResetDevice(OpName, false);
break;
case "IsNeedRepaire"://返修上线(返修上线点)
if (Convert.ToInt32(m_Value) == 1)
{
//修改托盘状态
MIS_BASE.Write_PalletInfo(OpName, 3);
//通知修改成功
MIS_BASE.Write_UpdatePalletOK(OpName, true);
IsNeedRepaire_OK(OpName);
}
else if (Convert.ToInt32(m_Value) == 0)
{
//通知修改成功
MIS_BASE.Write_UpdatePalletOK(OpName, true);
//直接给出工作完成
MIS_BASE.Write_MaterialVerifyOver(OpName, true);
}
else
{ }
break;
case "ContinueMatch":
//BaseDataSystemMES.QualityVerifyStatus_Hash_Write(OpName, true);
break;
//初始化网页信号
case "IniSingalToWeb":
InitializeSingalToWeb(OpName);
break;
case "Reset_Engine"://返修上线(返修上线点)
SetMoby(OpName);//将MES所有信号清空
//fun_EngineTypeGetOverPLC(OpName, 0);
//fun_EngineTypeGetOverPLC(OpName, 1);
break;
case "twoWorkSkip"://重新工作工件跳过工作(重新工作工件)
//工作完成
EngineTypeGetOver_PLC_Work_Skip(OpName);
break;
case "twoWork"://重新工作工件重新工作(重新工作工件)
//允许工作
EngineTypeGetOver_PLC_Work_two(OpName);
break;
case "SelectOrderForm"://分线接受前端模拟传递机型
_e.TagValueUp = "6";
EngineTypeGetOver_PLC(_e);
break;
case "outLineOpNameWorkOver"://分线接受前端模拟工作完成
_e.TagValueUp = "6";
_e.TagValue = 1;
MesRead(_e);
break;
default: break;
}
}
catch(Exception err)
{
////ApplicationLog.WriteLog(err, "Function02:WebSubmit");
}
}
private void SetMoby(string OpName)
{
try
{
//清空Moby时，需要将MES信号清空
MIS_BASE.Write_ClearMesMoby(OpName);
//BaseDataSystemMES.MesServer_Process_EngineTypeOver(OpName);
SendMessageFun.SendMessage("5123", "1111", OpName);
MIS_BASE.Write_ResetDevice(OpName, true);
System.Threading.Thread.Sleep(1000);
MIS_BASE.Write_ResetDevice(OpName, false);
}
catch
{
}
}
///
/// 网页重现登录，恢复关闭前的页面状态
///
/// 工位号
private void InitializeSingalToWeb(string OpName)
{
InitOpPosion(OpName);
////3显示操作指导图片 PicShow_String_FirstOpName
//SendMessage.PicShow_FirstOpName(OpOpNamename);
////1（直接在界面通过选择机型确认工序内容）
//SendMessage.ProcessList_FirstOpName(OpName);
//// MOBY数据
//SendMessageFun.SendMessage("5", "1", OpName);
//// 物料信息 物料信息
//SendMessage.MaterialList(OpName);
SendMessageFun.SendMessage("315", "111", OpName);
// 新增查询PLC直通状态 网页显示
//MIS_BASE.Read_TagTypeID(63, Opname, out S_plcStatus);
InitAlarm(OpName);
}
//分线发送工件到位信号函数
private void sendmessage(string OpName, int tagValue, string Command)
{
string SendMessage;
SendMessage = "MES|" + Command + "|" + OpName + "|" + tagValue;
SendMessageFun.AsyncSendMessage(SendMessage);
}
private void InitAlarm(string Opname)
{
FuntionMesRead.Alarm_InitAlarm_Send(Opname, out Hashtable ht);
foreach (DictionaryEntry kv in ht)
{
var TagID = kv.Key.ToString();
var TagValue = kv.Value.ToString();
FuntionMesRead.Send_AlarmMsg(TagID, TagValue);
}
}
private void InitOpPosion(string Opname)
{
int S_WorkCheckOver = Convert.ToInt32(MIS_BASE.ReadPLC(30, Opname));
string S_WorkCheckOver_Msg = "MES|checkWorkOverIsShow|" + Opname + "|" + S_WorkCheckOver;
SendMessage.AsyncSendMessage(S_WorkCheckOver_Msg);
bool S_WorkStart;//工件到位 DBX0.1
MIS_BASE.Read_WorkStart(Opname, out S_WorkStart);
if (S_WorkStart == true)
{
SendMessageFun.SendInfomation("WorkStart", Convert.ToString(Convert.ToInt32(S_WorkStart)), Opname);
}
//----------------------------------------------------
bool S_PartLoad;//申请上线
MIS_BASE.Read_PartLoad(Opname, out S_PartLoad);
if (S_PartLoad == true)
{
SendMessageFun.SendInfomation("PartLoad", Convert.ToString(Convert.ToInt32(S_PartLoad)), Opname);
}
//----------------------------------------------------
bool S_EngineGetOver;//传递机型 DBX0.4
MIS_BASE.Read_EngineGetOver_PLC(Opname, out S_EngineGetOver);
if (S_EngineGetOver == true)
{
SendMessageFun.SendInfomation("EngineTypeGetOverPLC", Convert.ToString(Convert.ToInt32(S_EngineGetOver)), Opname);
//5 显示订单、机型信息 线首工位用
SendMessage.ShowMoby_FirstOpName(Opname);
//界面显示物料信息
SendMessage.MaterialList_FirstOpName(Opname);
}
//----------------------------------------------------
bool S_FixAllow;//允许工作 DBX3.1
MIS_BASE.Read_FixAllow(Opname, out S_FixAllow);
if (S_FixAllow == true)
{
SendMessageFun.SendInfomation("FixAllow", Convert.ToString(Convert.ToInt32(S_FixAllow)), Opname);
}
//----------------------------------------------------
bool S_MesRead;//允许保存 DBX3.1
MIS_BASE.Read_QualityData_Read_CF(Opname, out S_MesRead);
if (S_MesRead == true)
{
SendMessageFun.SendInfomation("MesRead", Convert.ToString(Convert.ToInt32(S_MesRead)), Opname);
}
//----------------------------------------------------
bool S_ReadOver;//保存完成
MIS_BASE.Read_MesReadOver(Opname, out S_ReadOver);
if (S_ReadOver == true)
{
SendMessageFun.SendInfomation("MesReadOver", Convert.ToString(Convert.ToInt32(S_ReadOver)), Opname);
}
//----------------------------------------------------
bool S_MaterialVerifyOver;//工作完成 DBX2.3
MIS_BASE.Read_MaterialVerifyOver(Opname, out S_MaterialVerifyOver);
if (S_MaterialVerifyOver == true)
{
SendMessageFun.SendInfomation("MaterialVerifyOver", Convert.ToString(Convert.ToInt32(S_MaterialVerifyOver)), Opname);
}
//----------------------------------------------------
int S_QualityMask;//合格标志 DBX588
MIS_BASE.Read_QualityMask(Opname, out S_QualityMask);
if (S_QualityMask == 1)
{
SendMessageFun.SendInfomation("QualityMask", Convert.ToString(Convert.ToInt32(S_QualityMask)), Opname);
}
//----------------------------------------------------
string S_plcStatus = "false";//DBX501.5 PLC直通，1 强制放行 0 正常循环
if (S_plcStatus.ToLower() == "false")
{
SendMessageFun.SendInfomation("PlcStatus", "0", Opname);
}
else
{
SendMessageFun.SendInfomation("PlcStatus", "1", Opname);
}
}
}
}