using System;
using MesServerWork;
using bizFacade;
using SystemFramework;

namespace MesServerFunctions
{
    partial class Functions_BASE_04
    {
        /// <summary>
        /// 处理WEB页面发送过来的请求（m_Command + "|" + m_Value;）
        /// </summary>
        /// <param name="OpName"></param>
        /// <param name="Content"></param>
        private void WebSubmit(object e)
        {
            try
            {
                OpcData.CustomeEvetnArgs msgEvent = (OpcData.CustomeEvetnArgs)e;
                string OpName = Convert.ToString(msgEvent.OpName);
                string Content = Convert.ToString(msgEvent.TagValue);

                string[] dataArray = Content.Split('|');
                if (dataArray.Length != 2)
                    return;
                //消息类型
                string m_Command = dataArray[0].ToString();
                //消息参数
                string m_Value = dataArray[1].ToString();
                //消息参数数量
                string[] m_Value_array = m_Value.Split('&');
                //消息参数长度
                int m_Value_length = m_Value_array.Length;

                //工件信息
                string engineID = "";
                if (MIS_BASE.hashtable_EngineGetOver_EngineID.ContainsKey(OpName))
                {
                    engineID = MIS_BASE.hashtable_EngineGetOver_EngineID[OpName].ToString();
                }

                OpcData.CustomeEvetnArgs _e = new OpcData.CustomeEvetnArgs();
                _e.OpName = OpName;
                _e.TagValue = m_Value;

                //根据请求的命令处理逻辑
                switch (m_Command)
                {
                    case "Barcode":
                        if (m_Value_length > 1) return;
                        fun_Barcode(_e);
                        break;
                    case "ConfirmOkGo"://合格放行
                        //删除不合格放行记录
                        //修改托盘状态
                        //Update_PalletStatus(OpName, 1, false);
                        BaseDataSystemMES.BaseData_tagTable_Engine_IsNG_Delete(OpName, engineID);
                        MIS_BASE.Write_ConfirmOkGo(OpName, true);
                        MIS_BASE.Write_FalseGO(OpName, false);
                        break;
                    case "FalseGO"://不合格放行
                        //修改托盘状态
                        //Update_PalletStatus(OpName, 3, false);
                        BaseDataSystemMES.BaseData_tagTable_Engine_IsNG_Insert(OpName, engineID, "", "");
                        //BaseDataSystemMES.BaseData_tagTable_Engine_IsNG_Delete(OpName, engineID);
                        MIS_BASE.Write_FalseGO(OpName, true);
                        MIS_BASE.Write_ConfirmOkGo(OpName, false);
                        break;
                    case "NgGO"://不合格放行
                        //修改托盘状态
                        //Update_PalletStatus(OpName, 2, false);
                        //保存不合格信息(必须保存不合格放行信息，由于B5A的Moby没有不合格标志位)
                        BaseDataSystemMES.BaseData_tagTable_Engine_IsNG_Insert(OpName, engineID, "", "");
                        MIS_BASE.Write_FalseGO(OpName, true);
                        MIS_BASE.Write_ConfirmOkGo(OpName, false);
                        break;
                    case "OnLineState"://在线0、离线1、屏蔽2
                        try
                        {
                            if (m_Value_length > 1) return;
                            int a = Convert.ToInt32(m_Value);
                            if (a <= 2)
                            {
                                BaseDataSystemMES.IsOnLine_Update(OpName, m_Value.ToString());
                                MIS_BASE.Write_OnLineState(OpName, Convert.ToInt32(m_Value));
                            }
                        }
                        catch
                        {

                        }
                        break;
                    case "Reset":
                        SetMoby(OpName);//将MES所有信号清空
                        break;
                    case "FixAllow"://重新拧紧
                        WorkAgain(OpName);
                        break;
                    case "IsAutoGetEngineID"://自动手动申请编号（线首）
                        if (m_Value_length > 1) return;
                        MIS_BASE.Write_IsAutoGetEngineID(OpName, Convert.ToInt32(m_Value));
                        break;
                    case "PartPalletGoOver"://空托盘放行
                         int Is_PartPalletGoOver;
                        MIS_BASE.Read_PartPalletGoOver(OpName, out Is_PartPalletGoOver);
                        if (Is_PartPalletGoOver == 1)
                        {
                            MIS_BASE.Write_PartPalletGoOver(OpName, 1);
                        }
                        else
                        {
                            MIS_BASE.Write_PartPalletGoOver(OpName,0);
                        }
                        break;
                    case "SetMoby"://清空托盘（线首）
                        SetMoby(OpName);//将MES所有信号清空
                        break;
                    case "RepairUplineMES"://返修上线
                        MIS_BASE.Write_RepairUpline_MES(OpName, true);
                        break;
                    case "CancelRepair"://将返修件置为正常件

                        break;
                    case "PartPalletCode"://申请写入托盘号
                        //MIS_BASE.Write_PartPalletCode_PLC(OpName, 1);
                        break;
                    case "WritePartPalletCode"://写入托盘号
                        if (m_Value_length > 1) return;
                        MIS_BASE.Write_PalletCode(OpName, Convert.ToInt32(m_Value));
                        break;
                    case "Normal"://启用正常拧紧工位
                        MIS_BASE.Write_Normal(OpName, 1);
                        MIS_BASE.Write_UnNormal(OpName, 0);
                        break;
                    case "UnNormal"://启用备用拧紧工位
                        MIS_BASE.Write_Normal(OpName, 0);
                        MIS_BASE.Write_UnNormal(OpName, 1);
                        break;
                    case "ResetDevice"://复位设备
                        MIS_BASE.Write_ResetDevice(OpName, true);
                        System.Threading.Thread.Sleep(1000);
                        MIS_BASE.Write_ResetDevice(OpName, false);
                        break;
                    case "IsNeedRepaire"://返修上线(返修上线点)
                        if (Convert.ToInt32(m_Value) == 1)
                        {
                            //修改托盘状态
                            MIS_BASE.Write_PalletInfo(OpName, 3);
                            //通知修改成功
                            MIS_BASE.Write_UpdatePalletOK(OpName, true);
                            IsNeedRepaire_OK(OpName);

                        }
                        else if (Convert.ToInt32(m_Value) == 0)
                        {
                            //通知修改成功
                            MIS_BASE.Write_UpdatePalletOK(OpName, true);
                            //直接给出工作完成
                            MIS_BASE.Write_MaterialVerifyOver(OpName, true);
                        }
                        else
                        { }

                        break;
                    //初始化网页信号
                    case "IniSingalToWeb":
                        InitializeSingalToWeb(OpName);
                        break;
                    case "Reset_Engine"://返修上线(返修上线点)
                        SetMoby(OpName);//将MES所有信号清空
                        
                        break;


                    default: break;
                }
            }
            catch(Exception err)
            {
                ApplicationLog.WriteLog(err, "Function04:WebSubmit");
            }
        }
        private void SetMoby(string OpName)
        {
            try
            {
                //清空Moby时，需要将MES信号清空
                MIS_BASE.Write_ClearMesMoby(OpName);

                BaseDataSystemMES.MesServer_Process_EngineTypeOver(OpName);

                Sendmessage("5123", "1111", OpName);

                MIS_BASE.Write_ResetDevice(OpName, true);
                System.Threading.Thread.Sleep(1000);
                MIS_BASE.Write_ResetDevice(OpName, false);
            }
            catch
            {

            }
        }
        /// 网页重现登录，恢复关闭前的页面状态
        /// </summary>
        /// <param name="Opname">工位号</param>
        private void InitializeSingalToWeb(string Opname)
        {

            //工件到位 DBX0.1
            bool S_WorkStart;
            bool S_FixAllow;
            bool S_EngineGetOver;
            bool S_MaterialVerifyOver;
            bool S_FixOK;
            bool S_FixOver;
            int IsAllowWork;
            int EngineTypeID;
            string  EngineType;
            string EngineID;
            int PartPallet_Code;
            int ProcessCode;
            int BoltCode;
            int workStepProperty;

            MIS_BASE.Read_WorkStart(Opname, out S_WorkStart);
            MIS_BASE.Read_FixAllow(Opname, out S_FixAllow);
            MIS_BASE.Read_EngineGetOver_PLC(Opname, out S_EngineGetOver);
            MIS_BASE.Read_MaterialVerifyOver(Opname, out S_MaterialVerifyOver);
            MIS_BASE.Read_FixOK(Opname,out S_FixOK);
            MIS_BASE.Read_FixOver(Opname,out S_FixOver);

            //获取是否允许工作
            BaseDataSystemMES.MesServer_Judge_IsCanWork(Opname, out IsAllowWork);
            //获取Moby
            MIS_BASE.GetEngineTypeFromDB(Opname, out EngineTypeID, out EngineType, out EngineID, out PartPallet_Code);


            if (S_WorkStart == true)
            {
                SendInfomation("WorkStart", Convert.ToString(Convert.ToInt32(S_WorkStart)), Opname);
            }
           
            if (S_EngineGetOver == true)
            {
                SendInfomation("EngineTypeGetOverPLC", Convert.ToString(Convert.ToInt32(S_EngineGetOver)), Opname);
                Sendmessage("5123", "1111", Opname);

                //通知web显示
                SendInfomation("ShaftPosition", Convert.ToString(IsAllowWork), Opname);//显示拧紧位置

                if (!GetShaftWoringStepIsWorked_WorkGroup(Opname, EngineTypeID, EngineType, out ProcessCode, out BoltCode, out workStepProperty))
                {
                    //发动UDP,通知MES工作站拧紧第几组
                    SendInfomation("FixAllowGuid", Convert.ToString(ProcessCode) + "&" + Convert.ToString(BoltCode), Opname);//显示拧紧标志
                }
            }
            if (S_FixAllow == true)
            {
                SendInfomation("FixAllow", Convert.ToString(Convert.ToInt32(S_FixAllow)), Opname);
            }
            if (S_FixOK==true )
            {
                SendInfomation("FixOK", Convert.ToString(Convert.ToInt32(S_FixOK)), Opname);
            }
            if (S_FixOver == true)
            {
                SendInfomation("FixOver", Convert.ToString(Convert.ToInt32(S_FixOver)), Opname);
            }

            if (S_MaterialVerifyOver == true)
            {
                SendInfomation("MaterialVerifyOver", Convert.ToString(Convert.ToInt32(S_MaterialVerifyOver)), Opname);
            }
        }
    }
}