meswork/01-Siyuan-MesProject
6
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

init: 导入项目到 meswork Gitea

Browse Source
This commit is contained in:
XingCheng3
2026-05-29 10:07:05 +08:00
commit ad9a4106fb
3582 changed files with 460312 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

98
MisDataFunction/MesServer.Function/Function17/Methods/AllowTighteningStep.cs Normal file
View File

@@ -0,0 +1,98 @@
using System;
using bizFacade;
using MesServerWork;
//using SystemFramework;
namespace MesServerFunctions
{
partial class Functions_BASE_17
{
/// <summary>
/// 初始化处理工序工步执行过程
/// </summary>
private void InitWorkStep(string OpName, int engineTypeID, string engineType, string engineID)
{
try
{
NextWorkStep(OpName, engineTypeID, engineType, engineID);
}
catch (Exception err)
{
////ApplicationLog.WriteLog(err, err.Message);
}
}
/// <summary>
/// 处理工序工步执行过程下一步信息
/// </summary>
private void NextWorkStep(string OpName, int engineTypeID, string engineType, string engineID)
{
int workStepProperty = 512;
if (MIS_BASE.hashtable_workStepProperty == null)
{
MIS_BASE.InitHashtable_MesServerCode();
}
//获取工步属性
if (MIS_BASE.hashtable_workStepProperty.ContainsKey(OpName))
{
workStepProperty = Convert.ToInt32(MIS_BASE.hashtable_workStepProperty[OpName]);
}
//16和64都表示分步保存质量数据（B6中并不是表示正常拧紧与返修拧紧的关系）
if (workStepProperty == 16 || workStepProperty == 64)
{
int BoltCode = 0;
int ProcessCode = 512;
if (!GetShaftWoringStepIsWorked_WorkGroup(OpName, engineTypeID, engineType, out ProcessCode, out BoltCode,out workStepProperty))
{
//发动UDP,通知MES工作站拧紧第几组
SendInfomation("FixAllowGuid", Convert.ToString(ProcessCode) + "&" + Convert.ToString(BoltCode), OpName);//显示拧紧标志
//写入拧紧顺序
MIS_BASE.Write_ProcessCode(OpName, ProcessCode);
//写入子程序(套筒号)
MIS_BASE.Write_BoltCode(OpName, BoltCode);
//通知PLC允许工作
MIS_BASE.Write_FixAllow(OpName, true);
}
else
{
//如果合格，在线，回写“合格放行”和“工作完成”信号（注意清零）
MIS_BASE.Write_ConfirmOkGo(OpName, true);
MIS_BASE.Write_FalseGO(OpName, false);
}
}
}
/// <summary>
/// 判断是否还有需要拧紧的组号 ProcessCode=拧紧序号 BoltCode=套筒号
/// </summary>
/// <param name="opName"></param>
/// <param name="engineTypeID"></param>
/// <param name="engineType"></param>
/// <param name="ProcessCode">拧紧序号</param>
/// <param name="BoltCode">套筒号</param>
/// <returns></returns>
private bool GetShaftWoringStepIsWorked_WorkGroup(string opName, int engineTypeID, string engineType, out int ProcessCode, out int BoltCode, out int workStepProperty)
{
ProcessCode = 0;
BoltCode = 0;
workStepProperty = 0;
bool sn_WorkingStepIsOver = true;//是否完成拧紧
//电子看板_工位机型_质量数据测量位置_临时表_查询_完成情况
BaseDataSystemMES.MesServer_ShaftPosition_Select_FinishResult(opName, out ProcessCode, out BoltCode, out workStepProperty, out sn_WorkingStepIsOver);
//记录当前拧紧序号
if (MIS_BASE.hashtable_WorkGroupIndex == null)
{
MIS_BASE.InitHashtable_MesServerCode();
}
if (MIS_BASE.hashtable_WorkGroupIndex.ContainsKey(opName))
{
MIS_BASE.hashtable_WorkGroupIndex[opName] = ProcessCode;
}
return sn_WorkingStepIsOver;
}
}
}

46
MisDataFunction/MesServer.Function/Function17/Methods/CreateProductID.cs Normal file
View File

@@ -0,0 +1,46 @@
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data;
using bizFacade;
using MesServerWork;
//using BizDataAccess;
namespace MesServerFunctions
{
partial class Functions_BASE_17
{
/// <summary>
/// 根据扫描条码创建线外工件编号
/// </summary>
/// <param name="OpName"></param>
private void CreateEngineIDByBarcode(string opName, out string engineType, out int engineTypeID, out string engineID)
{
engineTypeID = 0;
int isRepair = 0;
string orderForm = "";
engineType = "";
string palletCode = "";
string repairCode = "";
engineID = "";
//获取订单号，发动机型号，发动机型号代码(在线首工位将选择的订单，机型等信息保存到监控表中)
BaseDataSystemMES.OpName_MIS_CreateMoby_Select(opName, out orderForm, out engineTypeID, out engineType, out engineID, out palletCode, out isRepair, out repairCode);
//保存机型数据到表[电子看板_发动机号_线首工位]
//if (!BaseDataSystemMES.GetEngineID_Save_Outline(opName, orderForm, palletCode, engineType, engineTypeID, engineID, "1"))
// {
// //工件编号创建失败+OpName
// engineID = "";
// engineTypeID = -1;
// engineType = "";
// AsyncSendMessage_Notice(opName, "保存工件信息出错...");
// return;
// }
}
}
}

121
MisDataFunction/MesServer.Function/Function17/Methods/EngineGetOverBaseWork.cs Normal file
View File

@@ -0,0 +1,121 @@
using System;
using System.Data;
using bizFacade;
using MesServerWork;
namespace MesServerFunctions
{
partial class Functions_BASE_17
{
/// <summary>
/// 正常逻辑工作(传递机型)
/// </summary>
/// <param name="OpName"></param>
/// <param name="EngineTypeID"></param>
/// <param name="EngineType"></param>
/// <param name="EngineID"></param>
/// <param name="PartPallet_Code"></param>
private void EngineTypeGetOver_PLC_Work(string OpName, int EngineTypeID, string EngineType, string EngineID, int PartPallet_Code,string OrderForm)
{
int IsAllowWork;
int RepairPartStatusPLC = 0;
int MES_QualityMask = 1;
//string OrderForm = "";//订单号
string EngineID_MES;
DataTable dt;
//第一步，查询订单号，保存机型、机型代码、总成号、托盘号、订单号到数据库
MIS_BASE.Read_EngineID_MES(OpName, out EngineID_MES);//获取MES总成号
BaseDataSystemMES.GetEngineID_Select(OpName, EngineID, out dt);
if (dt != null && dt.Rows.Count > 0)
{
OrderForm = Convert.ToString(dt.Rows[0]["订单号"]);
}
BaseDataSystemMES.OpName_MIS_MOBY_Insert(OpName, OrderForm, EngineTypeID, EngineType, EngineID, PartPallet_Code, 0, 0, "");
//第二步，将拧紧的信息放入到临时表里
BaseDataSystemMES.MesServer_ShaftPosition_EngineTypeOver(OpName);
//第三步，将零件信息转移到零件_临时表中（本地BOM与订单BOM的选择显示关系）
BaseDataSystemMES.MesServer_Process_EngineTypeOver(OpName);
//通知web显示
Sendmessage("5123", "1111", OpName);
MIS_BASE.Read_PalletInfo(OpName, out MES_QualityMask);//合格标志
MIS_BASE.Read_RepairStatus_PLC(OpName, out RepairPartStatusPLC);//返修标志
SendInfomation("QualityMask", Convert.ToString(MES_QualityMask), OpName);//显示合格标志
SendInfomation("RepairPartStatusPLC", Convert.ToString(RepairPartStatusPLC), OpName);//显示返修标志
if (MES_QualityMask != 1)
{
//工作完成
MIS_BASE.Write_MaterialVerifyOver(OpName, true);
SendInfomation("NgGO", "1", OpName);//显示不合格标志
return;
}
//第四步，用于工件离开后完工数量统计及工件编号追溯
BaseDataSystemMES.MaterialPush_EngineIDStatus_Insert(OpName);
//第五步，获取是否允许工作
BaseDataSystemMES.MesServer_Judge_IsCanWork(OpName, out IsAllowWork);
//通知web显示
SendInfomation("ShaftPosition", Convert.ToString(IsAllowWork), OpName);//显示拧紧位置
//暂时先定义为扫描完成才能进行压装工作，因为考虑到工作完成后，操作工未必会去扫描物料的情况
if (EngineID_MES == EngineID)
{
//拧紧逻辑
InitWorkStep(OpName, EngineTypeID, EngineType, EngineID);
}
else
{
AsyncSendMessage_Notice(OpName, "MES与PLC信息不一致！");
}
}
/// <summary>
/// 返修件需要工作
/// </summary>
/// <param name="OpName">工位号</param>
private void IsNeedRepaire_OK(string OpName)
{
string orderForm = "";
int engineTypeID;
string engineType = "";
string engineID = "";
string palletCode = "";
int isRepair;
string repairCode = "";
//从监控系统中查询出本工位信息
BaseDataSystemMES.OpName_MIS_Moby_Select(OpName,
out orderForm, out engineTypeID, out engineType,
out engineID, out palletCode, out isRepair, out repairCode);
EngineTypeGetOver_PLC_Work(OpName, engineTypeID, engineType, engineID, Convert.ToInt32(palletCode),orderForm);
}
/// <summary>
/// 允许读发动机号后，判断是工件否合格
/// </summary>
private bool TestEngineIDIsNG(string OpName, string EngineID)
{
//MES数据库中的不合格放行信息
bool isNG = false;
DataTable dt;
isNG = BaseDataSystemMES.BaseData_tagTable_Engine_IsNG_Select(OpName, EngineID, out dt);
return isNG;
}
}
}

323
MisDataFunction/MesServer.Function/Function17/Methods/MES.WorkStep.WorkGoup.ReadData.cs Normal file
View File

@@ -0,0 +1,323 @@
using System;
using MesServerWork;
//using BasicData;
using System.Collections;
using bizFacade;
//using SystemFramework;
using System.Data;
using DoWhatPlc;
namespace MesServerFunctions
{
partial class Functions_BASE_17
{
/// <summary>
/// 根据组号获得拧紧数据
/// </summary>
/// <param name="workGroup"></param>
private int GetTagValue(string opName, int engineTypeID, string engineType, string engineID, int ProcessCode, int PartPallet_Code)
{
//合格标志
int groupValueIsOK;
//组号
int workGroup_Index;
//序号
int sn_ShaftStep;
//工作顺序(拧紧顺序)
int sn_WorkingStep;
DataTable dt_ShaftPosition_WorkingStep;
groupValueIsOK = 2;
ShaftPosition.ShaftPosition_Select_WorkingStep(opName, engineTypeID, out dt_ShaftPosition_WorkingStep);
if (dt_ShaftPosition_WorkingStep != null)
{
//如果是workGroup=1,则第一次需要禁用索引
if (ProcessCode <= 1)
{
//不能delete 必须用update
BaseDataSystemMES.BaseData_tagTable_QualityData_B5A_SubTable_Delete(engineID, opName);
}
for (int i = 0; i < dt_ShaftPosition_WorkingStep.Rows.Count; i++)
{
workGroup_Index = Convert.ToInt32(dt_ShaftPosition_WorkingStep.Rows[i]["组号"]);
if (workGroup_Index == ProcessCode)
{
sn_ShaftStep = Convert.ToInt32(dt_ShaftPosition_WorkingStep.Rows[i]["序号"]);
sn_WorkingStep = Convert.ToInt32(dt_ShaftPosition_WorkingStep.Rows[i]["工作顺序"]); //没有其他使用
//保存拧紧数据
if (GetTagValue_DCT(opName, engineTypeID, engineType, engineID, sn_ShaftStep, PartPallet_Code) == 1)
{
groupValueIsOK = 1;
//显示红色拧紧轴
}
else
{
groupValueIsOK = 2;
//显示绿色拧紧轴
}
}
}
}
return groupValueIsOK;
}
/// <summary>
/// 根据序号,工作顺序获得测量值;将数据保存到数据库的临时表中。
/// </summary>
/// <param name="opName">工位号</param>
/// <param name="engineTypeID">发动机机型代码</param>
/// <param name="engineTypeID">发动机机型</param>
/// <param name="engineID">当前发动机号</param>
/// <param name="sn_ShaftStep">拧紧序号</param>
private int GetTagValue_DCT(string opName, int engineTypeID, string engineType, string engineID, int sn_ShaftStep,int PartPallet_Code)
{
int groupValueIsOK;
string tagValue1;
string tagValue2;
int isOK;
//合格标志的TagID
int tagID_isOK;
//TagID
int tagID;
int tagID1;
int tagID2;
//根据工位号获取哈西表
Hashtable valueList;
MIS_BASE.ReadPLC_Sync_ValueList(opName, out valueList);
GetTagIDBytagOrder(valueList, sn_ShaftStep, out tagID, out tagID1, out tagID2,
out tagValue1, out tagValue2, out tagID_isOK);
if (tagID == -1 || tagID1 == -1 || tagID2 == -1)
{
return 0;
}
GetPressData_Save(opName, engineTypeID, engineType, engineID,
sn_ShaftStep, tagID, tagID1, tagID2, tagValue1, tagValue2, tagID_isOK, PartPallet_Code);
isOK = tagID_isOK;
if (isOK == -1)
{
isOK = 0;
}
groupValueIsOK = isOK;
return groupValueIsOK;
}
/// <summary>
/// 根据列位置获取三个TagID(合格标志，扭矩，转角),以及对应的值
/// </summary>
/// <param name="valueList"></param>
/// <param name="sn_ShaftStep"></param>
/// <param name="tagID"></param>
/// <param name="tagID1"></param>
/// <param name="tagID2"></param>
/// <param name="tavIDValue1"></param>
/// <param name="tavIDValue2"></param>
/// <param name="isGoodBad"></param>
private void GetTagIDBytagOrder(Hashtable valueList, int sn_ShaftStep,
out int tagID, out int tagID1, out int tagID2,
out string tavIDValue1, out string tavIDValue2, out int isGoodBad)
{
int[] boolTemp = new int[32];//int数组存储轴类合格标志
bool IsGetgoodOrBad = false;//是否根据8203或者8209获取到合格标志
//初始化赋值
tagID = -1;
tagID1 = -1;
tagID2 = -1;
tavIDValue1 = "";
tavIDValue2 = "";
//合格标志的TagID
isGoodBad = 0;
QualityDataType qualityData;
int tagid;//TagID
int tagOrderBy;//列位置
int tagItemOrderBy;//变量排序
int tagTypeID;//TagID特点
int tagProperty;//变量特点（6,7）
object tagValue;//值
string tagValue_1 = "0";//值
//根据当前组号获取对应的质量数据
foreach (DictionaryEntry valueItem in valueList) //ht为一个Hashtable实例
{
try
{
qualityData = (QualityDataType)valueItem.Value;
tagProperty = Convert.ToInt32(qualityData.tagProperty);
tagid = Convert.ToInt32(qualityData.tagID);
tagTypeID = Convert.ToInt32(qualityData.tagTypeID);
tagValue = qualityData.tagValue;
tagOrderBy = Convert.ToInt32(qualityData.tagOrderBy);
tagItemOrderBy = Convert.ToInt32(qualityData.tagItemOrderBy);
//若为空，则转变为0
if (tagValue == null)
{
tagValue = 0;
}
//读取数据
switch (tagTypeID)
{
//轴合格标志
case 8209:
break;
//轴合格标志
case 8203:
IsGetgoodOrBad = true;
try
{
boolTemp = (int[])tagValue;
tagID = tagid;
isGoodBad = Convert.ToInt32(boolTemp[sn_ShaftStep - 1]);
//转换一下
if (isGoodBad == -1)
{
isGoodBad = 0;
}
}
catch
{
tagID = -1;
isGoodBad = 0;
}
break;
//非标准REAL
case 8210:
tagValue_1 = GetNoNormalReal(tagValue);
break;
default:
tagValue_1 = Convert.ToString(tagValue);
break;
}
//单个数据进行读取
if (tagOrderBy == sn_ShaftStep)
{
//获取到了当前的列位置（1,2,3,4）
//依次再获取合格标志，扭矩，转角
switch (tagItemOrderBy)
{
case 0://合格标志
if (!IsGetgoodOrBad)
{
tagID = tagid;
try
{
isGoodBad = Convert.ToInt32(tagValue_1);
//转换一下
if (isGoodBad == -1)
{
isGoodBad = 0;
}
}
catch
{
isGoodBad = 0;
}
}
break;
case 1:
tagID1 = tagid;
tavIDValue1 = tagValue_1;
break;//扭矩值
case 2://转角值
tagID2 = tagid;
tavIDValue2 = tagValue_1;
break;
}
}
}
catch
{
tagID = -1;
tagID1 = -1;
tagID2 = -1;
tavIDValue1 = "";
tavIDValue2 = "";
//合格标志的TagID
isGoodBad = 0;
}
}
}
/// <summary>
/// 列位置（序号）对应的数据
/// 保存数据到数据库
/// </summary>
/// <param name="opName"></param>
/// <param name="engineTypeID"></param>
/// <param name="engineType"></param>
/// <param name="engineID"></param>
/// <param name="tagOrderBy"></param>
/// <param name="tagID"></param>
/// <param name="tagID1"></param>
/// <param name="tagID2"></param>
/// <param name="tavIDValue1"></param>
/// <param name="tavIDValue2"></param>
/// <param name="isGoodBad"></param>
private void GetPressData_Save(string opName, int engineTypeID, string engineType, string engineID,
int tagOrderBy, int tagID, int tagID1, int tagID2, string tavIDValue1, string tavIDValue2, int isGoodBad, int PartPallet_Code)
{
//保存数据到数据库
//测量数据合格_手动拧紧_增加
BaseDataSystemMES.BaseData_tagTable_QualityData_B5A_Insert
(engineTypeID, engineType, engineID,
tavIDValue1, isGoodBad,
opName, PartPallet_Code.ToString(), tagID1, tagID);
//保存数据到数据库
//测量数据合格_手动拧紧_增加
BaseDataSystemMES.BaseData_tagTable_QualityData_B5A_Insert
(engineTypeID, engineType, engineID,
tavIDValue2, isGoodBad,
opName, PartPallet_Code.ToString(), tagID2, tagID);
}
/// <summary>
/// 返回非标准real
/// </summary>
/// <param name="vDataValue"></param>
/// <returns></returns>
static private string GetNoNormalReal(object vDataValue)
{
try
{
string real_a;
string real_b;
string groupValueString;
int length;
//int real_b_Int;
length = ((System.Array)(vDataValue)).Length;
groupValueString = "";
if (length != 2)
return "0.0";
real_a = Convert.ToUInt16((((System.Array)(vDataValue)).GetValue(0))).ToString();
real_b = Convert.ToUInt16((((System.Array)(vDataValue)).GetValue(1))).ToString("00");
groupValueString = real_a + "." + real_b;
return groupValueString;
}
catch
{
return "0.0";
}
}
}
}

129
MisDataFunction/MesServer.Function/Function17/Methods/SubmitToMisweb.cs Normal file
View File

@@ -0,0 +1,129 @@
using System;
using bizFacade;
//using SystemFramework;
namespace MesServerFunctions
{
/// <summary>
/// 此类用于向WEB发送各种类型消息
/// </summary>
partial class Functions_BASE_17
{
/// <summary>
/// 批量发送WEB消息（Value为BOOL值）
/// </summary>
/// <param name="MessageNumm">消息编号组合</param>
/// <param name="Value">消息值组合</param>
/// <param name="OpName">工位号</param>
void Sendmessage(string MessageNumm,string Value, string OpName)
{
for (int i=0;i<MessageNumm.Length;i++)
{
Sendmessage(MessageNumm[i], Value[i].ToString(), OpName);
}
}
/// <summary>
/// 选择发送给WEB的消息
/// </summary>
/// <param name="Num">消息类型</param>
/// <param name="OpName">消息工位</param>
void Sendmessage(char Num,string Value, string OpName)
{
string SendMessage;
switch (Num)
{
case '1':
//1（直接在界面通过选择机型确认工序内容）
SendMessage = "MES|ProcessList|" + OpName + "|" + Value;
AsyncSendMessage(SendMessage);
break;
case '2':
//2显示物料
SendMessage = "MES|MaterialList|" + OpName + "|" + Value;
AsyncSendMessage(SendMessage);
break;
case '3':
//3显示操作指导图片
SendMessage = "MES|PicShow|" + OpName + "|" + Value;
AsyncSendMessage(SendMessage);
break;
case '4':
//3显示操作指导图片
SendMessage = "MES|OrderFormList|" + OpName + "|" + Value;
AsyncSendMessage(SendMessage);
break;
case '5':
SendMessage = "MES|ShowMoby|" + OpName + "|" + Value;
AsyncSendMessage(SendMessage);
break;
case '6':
SendMessage = "MES|MaterialCheckPosition|" + OpName + "|" +Value;
AsyncSendMessage(SendMessage);
break;
case '7':
SendMessage = "MES|WorkStart|" + OpName + "|" + Value;
AsyncSendMessage(SendMessage);
break;
case '8':
SendMessage = "MES|OrderFormList|" + OpName + "|" + Value;
AsyncSendMessage(SendMessage);
break;
case '9':
SendMessage = "MES|ConfirmOkGo|" + OpName + "|" + Value;
AsyncSendMessage(SendMessage);
break;
case 'a':
SendMessage = "MES|FixAllow|" + OpName + "|" + Value;
AsyncSendMessage(SendMessage);
break;
default:
break;
}
}
/// <summary>
/// 向WEB发送信息（value为字符串）
/// </summary>
/// <param name="Command">消息种类</param>
/// <param name="Value">消息内容</param>
/// <param name="OpName">工位号</param>
void SendInfomation(string Command, string Value, string OpName)
{
string SendMessage = "MES|" + Command + "|" + OpName + "|" + Value;
AsyncSendMessage(SendMessage);
}
/// <summary>
/// 发送在线产量、在线节拍
/// </summary>
/// <param name="OpName"></param>
/// <param name="tagValue"></param>
private void SendActuallyCount(string OpName, int tagValue)
{
//当工件离开时，更新在线产量、在线节拍
if (tagValue == 0)
{
try
{
int opNameCount = 0;//在线产量
int opNameCountTime = 0;//在线节拍
//基本数据_工作日历_班次产量查询_New
BaseDataSystemMES.OpNameCount_New(OpName, out opNameCount, out opNameCountTime);
string SendMessage;
SendMessage = "MES|ActuallyCount|" + OpName + "|" + opNameCount.ToString() + "&" + opNameCountTime.ToString();
AsyncSendMessage(SendMessage);
}
catch (Exception err)
{
////ApplicationLog.WriteLog(err, "Function04:SendActuallyCount");
}
}
}
}
}

53
MisDataFunction/MesServer.Function/Function17/Methods/UDP.Send.cs Normal file
View File

@@ -0,0 +1,53 @@
using bizFacade;
////using SystemFramework;
using MesServerWork;
namespace MesServerFunctions
{
partial class Functions_BASE_17
{
/// <summary>
/// 发送信息到MES通讯服务器或者其他的
/// </summary>
/// <param name="Message"></param>
private void AsyncSendMessage(string Message)
{
MIS_BASE.asyncSendMessage(Message);
}
/// <summary>
/// 发送提示消息
/// </summary>
/// <param name="Message"></param>
private void AsyncSendMessage_Notice(string opname, string notice)
{
//通知Web界面
BaseDataSystemMES.Web_Notice_Insert(opname, notice);
string SendMessage = "MES|Notice|" + opname + "|" + "1";
MIS_BASE.asyncSendMessage(SendMessage);
}
/// <summary>
/// 发送信息到打印机
/// </summary>
/// <param name="Message"></param>
private void asyncSendMessageToMark(string Message)
{
string messageSend = (string)Message;
//UDPClientSend.Send_ALL(ApplicationConfig.MES_MarkPortNum, messageSend);
}
/// <summary>
/// 发送信息到LED
/// </summary>
/// <param name="Message"></param>
private void asyncSendMessageLED(string OpName)
{
//发送到大屏幕显示 41104
string strMessage = "MIS|" + OpName + "|" + "0" + "|" + "1";
//UDPClientSend.Send_ALL(ApplicationConfig.Port_ShowLED_ProductCount, strMessage);
}
}
}

BIN
MisDataFunction/MesServer.Function/Function17/Methods/vssver2.scc Normal file
View File

Binary file not shown.